how to hang a tapestry on the curved wall ?

Answer 1

how about velcro

Answer 2

If you do not want to buy the curved curtain hardware this is another solution; use l X l use on either wall and leave a space in the corner, brace another l X l to attach to the two ends. (1X1 are a slat you buy at Lowes in the wood department). You will have to now staple tapestry to wall. If this is a very heavy tapestry you might have to use T pins (also Lowes) that goes thru tapestry into top of wood. Good Luck!

Answer 3

Does it curve inward, or outward? If it curves outward, use a piece of rope or thick wire to stretch around the curve of the wall, fastening it on each end, in the middle, and in between the middle and the ends. Then fasten the tapestry to the rope.
If it curves inward, you will have to either fasten the tapestry to the wall in several spots to make it look like it follows the contour of the wall, or in just a few spots, and you will have to fold the tapestry in several spots so it will fan itself out as it flows down the wall.(Think pleats in a skirt or a kilt.)

Answer 4

If the tapestry is thick you mich want to get long nails and hammer them into the wall. It's a two person job because you want it to be as straight as possible. Plus I always had a bad habit of letting go or letting the tapestry slip and it comes out or it rips.

Answer 5

keep it flat the whole time you're trying to hang it, all my celieings/walls are slanted, so i have a technique haha. keep it as straight as possible, use thumbtacks or small nails, and put it in an upper corner first, while keeping it steady and straight stil, do the other upper corner. and the bottom should me wasy and even.

Answer 6

small nails