I've had my dvd player for a year, it worked fine until last week-end, I inserted the disk ok and it started spinning, but the TV was not projecting the image. I checked the connections and they seemed fine. Any suggestions as to what may be going on?
2007-01-26 07:51:54 · 3 answers · asked by Nena 1 in Consumer Electronics ➔ Other - Electronics
Try it with another TV (borrow a small one from a friend, relative or neighbor if you don't have another one yourself). Try a different DVD to see if it is only the one that may be bad. Find the manual and read the trouble-shooting section. Remove all the connections and replace them (checking is sometimes not enough). Make sure all your settings are right.
2007-01-26 08:00:40 · answer #1 · answered by Yahzmin ♥♥ 4ever 7 · 1⤊ 0⤋
If the tv screen is lighting up, the problem is very possibly the connection. Or you are possibly erring with a button on either remote. I am unfamiliar with Dvd players but Vcrs must coincide with the same base channel as the television set ususally channel 3 or 4.
2007-01-30 23:57:02 · answer #2 · answered by Brian H 4 · 0⤊ 0⤋
Easiest way is to try it on another TV. If it happens again then you know it's the player & not the TV. But it can also be the cable you are using. Is it composite, component, s-video, dvi, or hdmi? If you have extra cables try them to see if that's the problem.
2007-01-26 17:01:29 · answer #3 · answered by Chris L 7 · 0⤊ 0⤋