I have a 1990 Ford Aerostar van. The blower fan recently went out, I replaced it with a used one today, from a salvage yard. The blower fan works, but the air still doesn't come into the vans cab, like it should. I considered taking the dash cover off, to see if there is something to the heater/ac control panel disconnected. But, it started to get dark outside. Is this a possibility? Or is there something else, I need to check. Oh, and I replaced the fuse too, but that wasn't the problem, the fuse was still good. 10 amp, light green. Any imput would be appreciated.
2007-01-25 11:26:57 · 2 answers · asked by jeraboam2004 1 in Cars & Transportation ➔ Car Makes ➔ Ford
I think the actuator on those is vaccume but I could be wrong,check and see if there are any vaccume lines under the dash and that they're all connected.It could be the door itself in the dash that seperates hot/cold.It may be frozen or stuck.Or it can be a cable attatched to the heater control.Good luck.
2007-01-25 11:35:08 · answer #1 · answered by JACK OF TRADES 3 · 1⤊ 0⤋
maybe your fan isn't able to push enough air. Its a weakling so deal with it or go find another one.
2007-01-25 22:09:54 · answer #2 · answered by Anonymous · 0⤊ 0⤋