work in a saloon car, if so where do i put it, if not whats the best to stop bass vibration. Any answers saying stop playing loud music will be reported i only want helpful ones thanks. P.S sorry for the attitude.
2007-01-25 02:01:40 · 2 answers · asked by Michael B 3 in Cars & Transportation ➔ Car Audio
Yes this works in all cars.
Remove the inner door panels.
The Dynamat should be glued directly to the metal inside the car.
You want to do the insides of the doors, the trunk lid and sides.
An area often forgotten, but a PIA to do is the roof of the car since the headliner can be hard to get out and harder to put back in.
If you still need to deaden it you can do the floor under the carpets both inside the car and the truck (boot)
2007-01-25 02:09:11 · answer #1 · answered by shovelkicker 5 · 2⤊ 0⤋
Dynamat everything...if this is too expensive dynamat the panels that seem to be rattling.
Typically you will be doing the trunk...assuming you have a sub enclosure...pull off all the trim pieces and apply dynamat to all the metal that you can get at.
2007-01-25 06:56:44 · answer #2 · answered by BP 2 · 1⤊ 0⤋