I want to install vinyl tilesHow do I prepare my floor if there are dents and holes?

Question

home improvement

Answer 1

Install 1/4 " underlayment over your existing floor. Make sure you follow the nailing recommendations to the letter. If your existing floor is not rock solid, then you might be able to install 5/8 " underlayment instead. If the holes and dents are very small there is a type of filler you can use, just smooth it on with a putty knife.

Answer 2

You want to repair or replace your sub-floor. It is also a good idea if the floor is in a area subjected to water (like bath or kitchen) that you seal the floor as well. When we did our bathroom we fixed the problem floor areas, glued down a layer of nulan (pronounced nu-lawn not sure of spelling), then sealed it, then laid the new vinyl tiles...this was all over a 3 inch layer of concrete with 1 inch tiles set in it. (original floor of an old house. It was way too much to take it up!) The new tiles still look perfect almost 4 years later! It was well worth the time and effort. Good luck

Answer 3

You need to apply a filler before laying your cement/glue if you are on a concrete floor.
It's usually really liquid so that it will spread easily and result in a smooth and even surface. There are several brands you can get, just ask the clerks at the store where you buy your construction materials.

If your floor is made of wood than simply nail/screw a thin layer (¼" or 3/8") of plywood. That should do it.