English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

11 answers

There are no inherent mechanical problems with them. The recoil will be snappier than that of a 9mm or metal-framed .40s, and group size will range between 2" to 3" at 25 yards. A good grip is essential, due to the snappy recoil, the light weight of the gun. With factory FMJ and hollow-point ammuntion, it will be almost 100% reliable, rain or shine, and will function perfectly even if you feed it a diet of thousands of rounds per year. Some would consider the recoil spring on the .40 S&W Glock to be a bit on the light side, and they should be replaced every few thousand rounds or so for best results. And the trigger-pull falls somewhere between that of a single-action, and a double-action. It won't break as crisply, or pull as smootly as that of a good revolver, but it's more than good enough to do the job you bought the gun for.

With that being said, you shouldn't shoot plain lead bullets through them, nor is it recommended you use hand-loaded or reloaded (i.e. the brass casing has been used to make cartridges more than once) ammunition. The reason for the former is that Glock barrels use a different kind of rifling, compared to other pistol barrels, and, as such, will tend to foul up much faster using cast lead bullets. The reason for the latter is that Glock chambers don't fully support the head of the case, and .40 S&W is a high-pressure cartridge. Combine that with tired old brass and it's an invitation to trouble of the kB! (ka-BOOM) kind. Fortunately, for the typical shooter using jacketed factory ammunition, this is practically a non-issue.

2007-01-24 11:33:36 · answer #1 · answered by Sam D 3 · 0 0

A Glock 232? That's a .40S&W with the 4" barrel. I know of no inheriant issue with that paticular pistol except for the one that all Glocks have. You should shoot only jacket bullets in it. Cast lead or even linotype are going to cause you problems if you shoot them regularly in the pistol.

I'm not overly fond of the sights that come on Glocks these days but that is just a matter of personal opinion. If you having any trouble with the Glock take it back where you bought it.

Yet if the problem is that it jams regularly the issue may be that you are "limp wristing". This means that you are not creating a stable enough platform so that the force of the round going off cannot get the slide moving backward fully to eject the spent casing. This is not uncommon with inexperinced shooters. It is most likely to happen with light loads as well.

Good luck

2007-01-24 00:58:03 · answer #2 · answered by Christopher H 6 · 0 0

I own a G-23 and really enjoy shooting it. Like the others said about the only known issue is the kB issue. If you stick to factory new ammo you should not have a problem with it. Like any firearm, if you take care of it and give it proper maintenance then you will have many trouble-free and enjoyable years of shooting. Remember that if you are going to carry it in self defense that you are betting your life on it, so practice until you get proficient with it and make sure you feel completely comfortable with it.

2007-01-24 13:35:52 · answer #3 · answered by unknownfrontier 2 · 0 0

First off, the first two people who answered should really know what they are talking about before answering. It just shows how immature and ignorant you really are.

Second, the Glock is a suburb handgun with a very proven track record. With proper maintenance and care, it should be 100% dependable, accurate and a joy to shoot.

Have fun!

2007-01-24 03:49:10 · answer #4 · answered by Ron G 2 · 1 1

If its a glock your good to go...now, while shooting it you find a problem, don't worry, send it back to glock and they'll make every thing alright...so go out and enjoy!

2007-01-24 12:39:22 · answer #5 · answered by Spades Of Columbia 5 · 0 0

once you've a 19 are you getting yet another one, because you want a 40 cal? i like the length of the 23 extra effective, yet I actually have huge hands and the 22 is extra reachable for me to carry and fireplace. in case you'll carry the gun on you, i might want to get the 27.

2016-12-02 23:42:44 · answer #6 · answered by cutburth 3 · 0 0

I heard they fall apart after 500 rounds due to frame/slide erosion. OK, IT'S A JOKE, ALRIGHT! They are good like so many other premium models.

update: I never heard of a "suburb(an?) handgun".

2007-01-24 16:51:32 · answer #7 · answered by david m 5 · 0 0

well you shoulda asked this question BEFORE you bought it... but...

No. None. At all. Ever. Never ever. It's a Glock. It's made to take anything.

2007-01-24 02:06:53 · answer #8 · answered by No.4 Mk1(t) 2 · 3 0

Nope just keep it clean and sparingly oil it. And it should last you forever.


If you are going to shoot lead bullets you will need to buy an aftermarket barrel.Glock barrels don't like lead.

2007-01-24 17:27:49 · answer #9 · answered by . 6 · 0 0

I have no idea.. I don't have any guns, it would probably be bad if i did, because sometimes i feel the need to shoot stupid people, but without a gun i can't do that, if i had one though, it would be very tempting..

2007-01-23 17:53:19 · answer #10 · answered by *♥short~sh!t♥* 3 · 0 7

fedest.com, questions and answers