2007-01-23 16:57:51 · 6 answers · asked by Anonymous in Science & Mathematics ➔ Engineering
Actually, the Length, Width and Height is measured by the position of the object.A world wide technical standard says that any piece, or thing must be measure in its position as when functions properly.
So "Height" is the"z" parameter from the 3 D coordinates , the "Length" must be the "y" coordinate and the "Width" the "x".
This is not a rule, but it will help you to establish a way to take things
Good luck
Dfriend:)
2007-01-23 19:11:28 · answer #1 · answered by Dfriend 3 · 0⤊ 0⤋
I won't grant you with the suggestions, yet i will grant you with a attributable to freshen up them. a million. no rely if this is an equilateral (all components an same length) triangle, the section is (solid x width) / 2. So (18 circumstances x)/2 = sixty 3. freshen up for x. 2. Perimeter of a sq. 4 circumstances the size of a facet (all components are an same in a sq.). So 4x = 360. freshen up for x. 3. Perimeter of a triangle is the sum of the three components. so as which you have (5+x) + x + (4x) = sixty 5. freshen up for x. 4. the whole of the three angles in a triangle are one hundred and 80. So if 2 angles are 117, the in simple terms suitable attitude has to make it resembling one hundred and 80. 5. the edge of a sq. is 4 circumstances the size of a facet (all 4 components are an same in a sq.). the element of a sq. is the size of a facet greater effective by using itself (this is the area they get the term "squared" to point a quantity greater effective by using itself). 6. If its an equilateral triangle, the section is (base circumstances solid) / 2. 7. Perimeter of a rectangle is all 4 components added at an identical time (a rectangle has 2 short components an same length, and 2 long components an same length). the section is the fast factor length circumstances the long factor length. 8. The circumference of a circle is diameter x pi. the element of a circle is the radius squared x pi (radius is a million/2 the diameter). 9. the three angles of a triangle upload as lots as one hundred and 80 ranges. you have the two angles, you need to calculate the 0.33.
2016-12-12 19:04:26 · answer #2 · answered by ? 4 · 0⤊ 0⤋
a two dimensional object is measured as length times width. It is user defined. If it is not defined, common practise dictates that the length is the longest measurement. The height is always the THIRD measurement, (L x W x H), length and width being the first two.
2007-01-23 18:30:58 · answer #3 · answered by Anonymous · 0⤊ 0⤋
yeah, you're really the one who decides which side is the length, width, or height. Its arbitrary.
2007-01-23 17:13:44 · answer #4 · answered by bonesawosu 2 · 0⤊ 0⤋
I would rather describe it as length by width. Length would always be the longest side.
2007-01-23 17:05:09 · answer #5 · answered by John T 6 · 0⤊ 0⤋
I don't believe there is a 'standard'. It would be best if you defined your measurements yourself. That way there will be no confusion.
2007-01-23 17:08:26 · answer #6 · answered by Doctor J 7 · 0⤊ 0⤋