English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

it's a spray paint made specifically for metal surfaces. i didn't like the results and want to remove the paint and leave the starting metal.

2007-01-23 05:49:36 · 6 answers · asked by tinkerellen 1 in Home & Garden Decorating & Remodeling

6 answers

try acetone in a well ventilated room, wipe dry and the balance will evaporate. it will not affect your finish.
if it doesn't,'t break loose on 1st wipe, try lacquer thinner then go to the acetone, clean with wtr and polish to desired finish.

2007-01-23 06:43:09 · answer #1 · answered by ticketoride04 5 · 0 0

Kleen strip makes a good stripper. it is toxic so if in doubt use the less toxic but less effective water stuff. use 0000 or 000 steel wool to wipe the stuff off. dont use any blades because that will scratch it up big time. to polish the chrome I would use never-dull. it is cotton treated with polish and is easy to use. it comes in a little blue tin.

2007-01-23 09:12:07 · answer #2 · answered by realamerican 2 · 0 0

Get some "Goo Gone" or "Goof Off" at Home Depot or Lowe's. Also can be found at grocery and hardware stores. It will work!!!

2007-01-23 06:32:16 · answer #3 · answered by bugear001 6 · 0 0

sos pads they are the right tool for the gob you use them on pots and pans

2007-01-23 05:55:32 · answer #4 · answered by Anonymous · 0 0

i want the answer

2007-01-25 16:44:03 · answer #5 · answered by babycoaldust 1 · 0 0

steelwool and varsol

2007-01-23 05:57:09 · answer #6 · answered by grumpy0282 3 · 0 0

fedest.com, questions and answers