For any body in Oil & Gas industry-What are the reasons for mud-cut in suction valve seat portion of mud pump?

Question

Mud pumps are used in drilling rigs drilling for oil/gas. They are generally triplex reciprocatiing pumps of robust construction having capability to develop 5000 psi or more of discharge pressure and handling high viscous slurries.

Answer 1

The first reason is solid control
All the solid control system should be good condition,
like shale shaker,de Sander,De silter,Centrifuge
and Suction stainer of pump.
and one main cause is While mixing by hopper most of times roustabout never use stainer in hopper,it cause to enter debits in suction mud Tank,
and drilling parameter or ROP is fast so every 6 hours Sand trap should Dump by half to control solids
you can minimise the mud cut in seat or value by the above solution and by using the genuine parts of seat and value,
and remember the seat have only 300 hours and value have only 150 hours cap.

Answer 2

it incredibly is a sensible poem displaying glaring skill. My concern is that on first examining, it looked somewhat depressing even even with the undeniable fact which you supply a typical precis on the top. for sure, the 1st stanza appropriately describes actuality. in line with danger I purely desire greater delusion in real life! Your seen photos artwork yet each and every little thing could properly be more advantageous..good? attempting to be as powerful as attainable...