Which one would be best?
*2 600 watt amps that equal out to 1200
or
* A amp that is already 1200 watts
2007-01-22 13:29:22 · 6 answers · asked by c_tackett10 1 in Cars & Transportation ➔ Car Audio
this depends on what you are trying to power. But your best bet would be to go with one large 1200 watt amp. Unless your two 600 watt amps are bridgeable then they wont do as much as the 1200 watt amp will. Plus its easier to just use one big amp than to try and bridge 2 amps together. theres more wiring to be done that way.
2007-01-22 13:49:33 · answer #1 · answered by RJ 6 · 0⤊ 0⤋
If the 1200 watt (RMS, I hope) amp is 600 X 2 channels, then it makes no difference....
2007-01-22 13:33:23 · answer #2 · answered by waynebudd 6 · 0⤊ 0⤋
This one is the best. Rockford Fosgate Prime R500-1 500 Watt Mono Amplifier Technical Details * Mono amplifier delivers 500 watts at 2 ohms, 350 watts at 4 ohms * Variable low pass crossover with 12dB/octave slope and 40Hz to 130Hz crossover point * Punch Bass adjustable bass level control of 0 to +12 dB centered at 45Hz * RCA inputs for signal level input and pass-through jacks for system building * The input gain control is preset to match the output of most source units
2016-05-23 23:25:15 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Ask if the power rating is RMS or peak-to-peak, and what percentage THD are they (total harmonic distortion)?
I your not one of these people drive around and make everyone else hear your rap music.
2007-01-22 13:40:25 · answer #4 · answered by Bad Samaritan 4 · 0⤊ 0⤋
2 amps is more power of COURSE!
2007-01-22 13:36:21 · answer #5 · answered by The Roman Maze 6 · 0⤊ 0⤋
The 2nd one.
2007-01-22 13:33:15 · answer #6 · answered by lola 3 · 0⤊ 0⤋