theres no sound and the light from the amp keeps flashing.
2007-01-22 12:01:15 · 3 answers · asked by Luis R 1 in Cars & Transportation ➔ Car Audio
make sure you have power at the source( via the power side of the amp) either with a multi meter or test light repeat this on the remote terminal using the amps ground terminal to ground your meter, once you establish you have a min of 11 volts unplug your rca jacks from the amplifier then turn on the amp if your protection light is still on or blinking generally the amp is bad
and needs repair or replacing.also repeat this without the drivers
plugged up
2007-01-26 08:31:59 · answer #1 · answered by masterinstall3 5 · 0⤊ 0⤋
i cant give you a full answer without more info but the light flashing more than likely means you have a problem with your power source. check your power wire remote wire and ground wire if the all have good connection's, make sure your RCA cables are connected well, then make sure your speakers are connected properly. if none of that works come back with more info.
2007-01-22 12:22:25 · answer #2 · answered by jjissodamngreat 4 · 0⤊ 0⤋
Not enough information to help....
2007-01-22 12:05:03 · answer #3 · answered by waynebudd 6 · 0⤊ 0⤋