Using high quality paint, is it ok to paint directly over drywall joint compound?

Answer 1

You will be able to see where the compound is.There is a product called First Step , and First Coat,available at Lowes Home Depot,etc.This product is made just for your application,I blends in new work and evens out old work.If I was using quality paint I would use this product first and make the job look wonderful,not like patch work or blotchy.

Answer 2

It's okay. No one will arrest you.... but if you're using high quality paint, it'll cost you a fortune because the compound will just suck that paint up like a sponge and you'll have to put more and more coats of paint.

The best way to go is to use an oil-based primer over the drywall before putting your good paint on. Oil-based primer is inexpensive and will get the job done. This way, you'll only have to put one or two coats of paint on, as opposed to like 4, 5, 6 of expensive paint..... My favorite primer is Bull's Eye 1-2-3 or Kilz but any other oil-based primer is fine.

So hang onto your good paint, and prime it first.....

Answer 3

It is best to use a primer/sealer for new construction. This will seal the new compound and keep your high quality paint from soaking in, yielding a more uniform appearance to the finished wall.

Answer 4

You really need to use a primer first. I would recommend latex for it's ease of installation and cleanup. And be prepared to put 2 coats of paint on, even if it is high quality.

Good Luck!!!

Answer 5

You can do it but that section of wall will always look different in terms of gloss and some color difference. It is better to use a primer.