2007-01-17 11:43:08 · 4 answers · asked by I fear my government 4 in Sports ➔ Outdoor Recreation ➔ Hunting
The proper measurement is center to center of the 2 holes farthest apart. You get this by measuring outside to outside of the 2 holes farthest apart and subtracting the caliber of the gun from your measurement. I use a dial caliper to measure groups. It makes the math easier.
2007-01-17 12:35:57 · answer #1 · answered by mountainclass 3 · 3⤊ 0⤋
The above two answers are correct. Measure from the centers of the holes farthest apart. I reccommend shooting 5 shot groups in under 1 minute to obtain more typical measurements.
However, don't be too suprized if your rifle doesn't shoot quite as accurately as you think it should.
Most (scoped) rifles today are capable of shooting 2 1/2 to 3 inch groups at 100 yards with a steady rest and that accuracy is very acceptable. A quality bolt or pump action rifle should be able to shoot 2 inch groups on a pretty regular basis.
My remington 30-06 pump action rifle will shoot 5 shot groups that are 2" or less @ 100 yards all day long. This was after I found a great scope and discovered which ammo my gun seemed to prefer. Ammunition will make a big difference in your groupings. Experiment with many different bullet weights and maufacturers, you will be rewarded for your time.
2007-01-17 13:58:24 · answer #2 · answered by Ryan F 1 · 0⤊ 0⤋
Center of holes to center of furthest hole, the widest center to center measurement.
2007-01-17 11:51:35 · answer #3 · answered by Anonymous · 2⤊ 0⤋
center.
2007-01-17 11:46:19 · answer #4 · answered by Ducky 3 · 1⤊ 0⤋