1. Press and hold presets 2 and 3 for about 5 to 10 seconds until you
get 3 digits on your display. This is the first 3 of 6 digits you will
need, so write 'em down.
2. After doing step one and writing down the code, immediately press
the
AM/FM button to get the last 3 of the 6 numbers you'll need, and write
'em down. (if you wait too long between steps 1 and 2 and the LOC code
displays again, just start over).
3. Call this number, it's a prerecorded message, so don't worry about
having to talk to anyone...1-800-537-5140. The voice will ask if
you're
calling for Chevy, Pontiac, Cadillac, etc... When you here him tell
you
to press "2" for Pontiac, press 202107 and hit the # key. He'll ask
you
for the 6 digit code that you've written down. Enter that and press
the
* key. He will then give you a code, and the option to get additional
4
digit codes, but one should be sufficient.
4. Follow the normal procedure in your owners manual for unlocking the
radio with your new code...press the hour set button on your radio
until
you get the first two numbers of the code, then press the minute set
button until you've entered the last two numbers. Immediately press
the
AM/FM button once the correct code is entered and the code SEC or
"secured" will be displayed on the display screen. Now, just turn the
radio on, and your ready to roll.
There is an additional step you can take to remove all codes from the
radio and start from scratch by entering your own personalized 4 digit
code so that it won't get you in a pickle again! Just repeat step 4
and
you should get a display screen that reads ---. This means the code is
out, and you can now program your own code. Of course, once you
receive
the 4 digit code from the GM recorded message, just keep it in a safe
place, because you can use that same code again and again should you
have any more problems with it in the future. Good luck, and yes, it
does work.
when i did it i had to change the 202107 to 102107 so good luck and i hope it works for you.
2007-01-18 18:38:19
·
answer #1
·
answered by tink1220 1
·
1⤊
1⤋
1
2016-12-25 15:21:14
·
answer #2
·
answered by Anonymous
·
0⤊
1⤋
You have to go to the dealer They have to phone a code they get from the car using the tech 2 scanner into GM . GM give the tech a code to punch in to unlock it. No one else can do it sucks I know .They hope it stop theift of their stereos How wants a stock radio.Good luck hope I helped
GM tech for 20 years
2007-01-16 14:58:15
·
answer #3
·
answered by Rudedude 4
·
2⤊
0⤋
Call the manufacturer of the radio. I bought one from the flea market that used a cd with songs that you chose for the security code. Anyway, you will probably give them your serial number and they may charge you a small fee, or you may need to send it in. They will tell you. ALso call the Aztek dealer too.
2007-01-16 15:11:51
·
answer #4
·
answered by Big C 6
·
0⤊
1⤋
By opening the manual you got with it, finding the card with the code that says "Do not lose this card or you will be unable to unlock your radio" and entering the code on the card.
2007-01-16 14:57:32
·
answer #5
·
answered by oklatom 7
·
0⤊
3⤋
2
2017-03-08 19:54:51
·
answer #6
·
answered by ? 3
·
0⤊
0⤋
Theftlock
2016-12-29 04:18:33
·
answer #7
·
answered by deklerk 4
·
0⤊
0⤋
Remove and replace BCM fuse 28 under hood
2016-01-26 10:08:41
·
answer #8
·
answered by Mike 1
·
0⤊
0⤋
Call any GM dealers, they only one have the code....tell them you just replace a new battery and lost the code.
2007-01-16 22:09:50
·
answer #9
·
answered by MINH H 3
·
0⤊
0⤋
Call the pontiac dealership, give them your vin no, and they'd give you the unlock code.
2007-01-16 14:52:47
·
answer #10
·
answered by Anonymous
·
0⤊
1⤋