English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

In those glue bottles, not gluesticks, how does all that sticky liquid glue NOT stick to the inside, if it sticks everything else together? I choose best answers rather quickly, so the faster you answer, the better of a best answer chance. ^^

2007-01-15 14:03:54 · 12 answers · asked by Annette L 2 in Science & Mathematics Other - Science

12 answers

Glue needs to "harden" to transfer from a liquid state into a sticky state, then hardens.

Therefor it required air to harden. Inside the glue bottle the lid it usually capped off.

There is also the matter of volume. A LITTLE layer of glue is what you use to stick paper together. A LOT of glue and it sits there in a WET GLOB. YES as it dries out will hold the surfaces together (and look ugly) but it does work.

2007-01-15 14:15:17 · answer #1 · answered by Vanchaser 3 · 3 1

There are many types of glues.

Most glues need to be exposed to the environment to cure or dry. In some cases water, or a solvent must evaporate from the glue for it to harden. In other cases oxygen in the air must react with the glue.

Not all glues will adhere to all materials. Some containers are chosen specifically because the glue will not adhere. i.e. super-glue (cyanoacrylate) will not to stick to polypropylene (the plastic used in milk jugs).

2007-01-15 14:07:47 · answer #2 · answered by DT 4 · 2 0

Why would not glue stick with the interior the bottle? No oxygen -If no one buys a cost ticket to a movie do they nonetheless educate it? definite -How previous are you earlier it would want to be suggested you died of previous age? 50+ -Do penguins have knees? in the journey that they could mattress their legs -Why do human beings consistently go back to the refrigerator with hopes that something new to devour would have materialized? In hopes that we neglected something. -If a hermaphrodite were given despatched to a particular gender reformatory, that you will be able to it get despatched to? Solitary confinment -How come human beings inform you to stay a baby for thus long as you could. yet the instant you do something infantile or immature they inform you to strengthen up. reason no one is ever chuffed, and favor excuses. -If marbles are literally not made up of marble, why are they called marbles? because of potheads. -Why at the same time as human beings ask you "what 3 issues might want to you convey with you on a barren area island?" no human being ever replies, are you particular about that? -Why would not broccoli are available a can? because each and each and every of the ends might want to fall off -If mirrors favor mild to paintings, what occurs in case you position evening creative and prescient goggles on contained in the darkish and look at a replicate? you look as if paris hilton -What structure is the sky? open.

2016-12-02 08:37:36 · answer #3 · answered by ? 4 · 0 0

When glue dries it dries on smooth since the inside of a bottle is smooth they wont stick together as easily thats why in arts and crafts you might see someone sandpaper the bottle so the bottle is rough

2007-01-15 22:15:52 · answer #4 · answered by savannah 2 · 1 0

think about it when you use alot of glue does it dry faster or slower than when you use a little bit of glue, when oxygen reaches the liquid particles in the glue they evaporate and the two surfaces touching the glue are physically bonded do to inflexibility of the dried glue

2007-01-15 14:10:12 · answer #5 · answered by Anonymous · 2 0

Due to coming in contact with the atmosphere, the glue oxidizes and changes in composition becoming hard. It dries up in other words.

2007-01-15 14:10:25 · answer #6 · answered by Kool-kat 4 · 1 0

They have to have air on the surface (more than the amount they get in their container) and they have to dry out to stick. That's why when you glue something, you have to wait for it to dry if you want it to stick.

2007-01-15 14:08:22 · answer #7 · answered by Amanda 6 · 1 0

FOR GLUE TO DO IT'S FINALLY PART IT REQUIRES AIR TO COMPLETE THE PROCESS. LEAVE THE LID OFF AND IT WILL
DRY UP AND STICK TO THE BOTTLE, LEAVE THE CAP ON AND THE AIR DIES AWAY.

2007-01-15 14:12:58 · answer #8 · answered by SLY ONE 3 · 0 0

i guess u need air for the glue to dry,a gas would be evaporated before it fixes on the surface

2007-01-15 14:10:45 · answer #9 · answered by rat333sa 1 · 0 0

It does if you allow it to breathe. It needs air to harden. Leave the cap off and your question is answered.

2007-01-15 14:42:45 · answer #10 · answered by Brendan R 4 · 0 0

fedest.com, questions and answers