2007-01-15 08:02:10 · 2 answers · asked by metalworker420 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
First thing you will have to do before trying to unplug the two wiring connectors,is to apply heat to the area where they plug in.if you don`t you will damage the connectors and not be able to plug it in the new one.I always use a hair-drier .It produces just enough heat to soften up the sealant to make it turn loose.next remove the nut on shifter shaft and remove arm,take 2 bolts out that hold it on .slide it off.You will also need to apply heat when plugging in conn on new sw.
2007-01-17 11:20:02 · answer #1 · answered by deltech 4 · 0⤊ 0⤋
it bolts to the driver side of the transmission. sensor should have a mark on it that lines up with neutral make sure that is lined up or it will not start
2007-01-15 16:16:25 · answer #2 · answered by Tom Z 1 · 0⤊ 0⤋