I think the deciding factor for HD lies in two places: your computer's hardware and software, and your tv. To edit HDV (not AVCHD, more on that later), you need a fairly fast computer, dual cores are preferable. Also, your editing software needs to support HDV. HDV is encoded in MPEG-2, which means that not every frame contains a full picture. In this case, your computer has to "draw" the missing frames, and different types of MPEG-2 wont work together. As for your tv, an HD set is preferred to watch HD. However, if you have an SD set, you can downsize to SD, but in your case it might be better just to go with a cheaper SD cam instead of an HD cam.
As for CCDs, its the actual chip that transforms a picture from the lens into an electronic image. CCDs generally use more power than CMOSs, but low light is better. However CMOS are gaining more popularity, so either one is good. 3ccds means that there are 3 separate ccds for each color: R,G, and B. This allows better color representation instead of one CCD.
If you plan on going SD, DV is the way to go. If not DV, then HDD cams. All Im trying to say is that these are easier to edit, and therefore more versatile than DVD cams. DV is the best choice, because it offers the best image quality. HDD is good, but it compresses in MPEG-2. If you plan on going HD, get an HDV cam. Theres a new codec out called AVCHD, and it allows HD recording on dvds and HDD cams, but no software yet supports it, and even though it is a good codec, it is super compressed, so quality cant measure up to HDV. HDV is the same thing as miniDV, and uses the same tapes, but the signal recorded is different. So theres no difference in media between dv and HDV. And as for 8mm or Hi-8, no. Dont go there.
If you want auto, any camera has it. If you want manual, very few cams have it. IMO, I think its okay to use auto for "normal" settings. Lighting and movement fluctuates. But to use auto for distance, portraits, action, settings for one particular situation? You should use manual instead, if possible. All the camera is doing is essentially locking down shutter speed, aperture settings to a particular setting, something you could do in manual. Auto in "normal" is different, because it changes according to conditions. But chances are that your camera will probably come only with auto, and little or no manual controls at all. If thats the case, go ahead and use the settings.
Optical zoom is better than digital zoom. Optical zoom actually uses the lens to enlarge an image so no quality is lost, while digital takes what you already have and makes it bigger. Its like taking a magnifying glass and looking at an object compared to taking a magnifying glass and looking at a picture of an object. The second one will cause quality loss. So dont be fooled by 1000x digital zooms. Just look for optical.
As for sound, a good onboard mic is a plus, but if you're really serious about it, a mic port is necessary. Then you can buy a better shotgun mic and stick it on your camera. If thats not the case and you arent planning to go the pro audio route, then just look for a good onboard mic, usually the best ones are located up front, are stereo (although not always the case), and in prosumer cams, are separated from the actual camera body.
Hope this helps!
2007-01-15 02:32:07
·
answer #2
·
answered by evilgenius4930 5
·
2⤊
0⤋
the reply relies upon on the capturing situations. ordinarily, a three CCD digital camera will record video in low gentle with a lot less photo noise than a a million CCD digital camera will. A severe-Definition digital camera would have a million or 3 CCDs. undergo in concepts that we do not yet have HD DVDs, so your playback and distribution recommendations for HD are restricted.
2016-10-31 03:07:02
·
answer #3
·
answered by ? 4
·
0⤊
0⤋
Amor MPEG to DVD Burner is a powerful and handy tool to burn video DVD disc from exist DVD VCD SVCD compatible MPEG files which has been converted using your video converting tools, So you can play movies on your home DVD Player. With this software, you can create a real DVD, not only a MPEG file on your hard disk.Create menu for DVD movie. It support NTSC and PAL TV mode, support Normal TV's aspect ratio (4:3) and HDTV's aspect ratio(16:9), support CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW disc, support a broad range of DVD-R/RW and DVD+R/RW burners. High-Speed burner engine inside and very easy to use,Skinable UI with 13 built-In skins,It is a Powerful and versatile DVD creator.
Amor MPEG to DVD Burner Key Feature:Support Normal TV's aspect ratio (4:3) and HDTV's aspect ratio(16:9), support CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW disc, support a broad range of DVD-R/RW and DVD+R/RW burners.
Amor MPEG to DVD Burner is a powerful and handy tool to burn video DVD disc from exist DVD VCD SVCD compatible MPEG files which has been converted using your video converting tools, So you can play movies on your home DVD Player.
With this software, you can create a real DVD, not only a MPEG file on your hard disk.Create menu for DVD movie.
Very stable Performance.
High-Speed burner engine inside and very easy to use,Skinable UI with 13 built-In skins,It is a Powerful and versatile DVD creator.
It support NTSC and PAL TV mode.
No adware and No spyware.
Take up the very few system resources.
2007-01-18 18:14:59
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋