on a digital camera, go to the picture taking mode, and go to the Flash tab. move the flash down to about -0.3, and test it.
2007-01-14 13:01:42
·
answer #1
·
answered by onlyblonde1 3
·
0⤊
0⤋
You can use a defuser or if you are taking picture inside try facing the flash towards the ceiling, it will light everything but soften it quite a bit. (This only works on some cameras or external flashes)
Different cameras work different ways and so you really need to look up your specific camera settings, or you can just start fiddling with the flash setting and see what looks good to you.
Also you can usually adjust the flash settings on almost all digital cameras. Try reading the manual and see what it says. Plus distance from the subject can change the appearance of the flash.
2007-01-14 21:00:44
·
answer #2
·
answered by Lillithin 3
·
0⤊
0⤋
I dont know if you can edit your question, but if so, what model camera do you have?
Perhaps there is a outdoor / indoor setting.
Some camera have pre-set up flash levels for fast moving objects or even fireworks.
2007-01-14 21:02:20
·
answer #3
·
answered by wishiwas 4
·
0⤊
0⤋
Are you maybe getting too close to whatever you're trying to take pictures of when you've got the flash on? It could be the camera... not all digital cams take great pics. Look at your owner's manual for tips, too!
2007-01-14 21:01:21
·
answer #4
·
answered by neuralchick 1
·
0⤊
0⤋
im sorry i was just speakin the truth and you were rude to her she was just askin a question you had no right to be so hateful
2007-01-14 22:14:13
·
answer #5
·
answered by lovemonkey05 1
·
0⤊
0⤋
Warm. If it doesn't show this put Medium. Also if you don't see any put it in the middle.
2007-01-14 21:01:48
·
answer #6
·
answered by jakobdyl 2
·
0⤊
0⤋
what a piece of sht camera u have
2007-01-14 21:00:23
·
answer #7
·
answered by KO 3
·
0⤊
0⤋
i think u should get a new 1!!! GOOD LUCK!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2007-01-14 21:00:34
·
answer #8
·
answered by Miley Cyrus's#1 fan 2
·
0⤊
0⤋