2007-01-14 10:43:40 · 10 answers · asked by Anonymous in Science & Mathematics ➔ Engineering
in a pipe
2007-01-14 10:47:22 · answer #1 · answered by damien r 2 · 2⤊ 0⤋
Through gas pipes either in the wall or under the floor.
There is an other answer and that is it is distributed evenly throughout the volume available for it to expand into.
2007-01-14 10:53:44 · answer #2 · answered by Anonymous · 2⤊ 1⤋
Generally over the roof or in attic spaces. Any wall penetrations and underslab gas piping has to be sleeved. All vents from pressure regulators have to vented to outside the building. I'm assuming we're talking about natural gas.
Need to get a copy of the fuel gas code. You can order it online.
2007-01-14 10:53:07 · answer #3 · answered by Roadkill 6 · 0⤊ 1⤋
Piping- either ungalvanized steel, PVC or polyethelyne. Do NOT use copper. Natural gas will corode holes in it and cause leaks. Brass is OK but expensive. PVC is the cheapest, but be sure joints are made properly, so as not to leak.
2007-01-14 16:22:46 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Gas distribution is exponentially related to the number of cans of beans ingested by the dwellers.
2007-01-14 10:49:32 · answer #5 · answered by Anonymous · 0⤊ 2⤋
Through galvanized iron pipes.
2007-01-14 11:29:39 · answer #6 · answered by Anonymous · 0⤊ 0⤋
through pipes
2007-01-14 12:21:53 · answer #7 · answered by tugboat 4 · 0⤊ 0⤋
through copper pipe
2007-01-14 10:48:39 · answer #8 · answered by Anonymous · 0⤊ 1⤋
Out of my bottom
2007-01-14 10:48:01 · answer #9 · answered by Anonymous · 0⤊ 2⤋
Please tell me
2007-01-14 10:47:17 · answer #10 · answered by Anonymous · 0⤊ 1⤋