2007-01-14 00:42:36 · 4 answers · asked by hornsrule101 2 in Sports ➔ Outdoor Recreation ➔ Other - Outdoor Recreation
All there is to clean is your barrel (remove and run through hot water and clean with a squeege), clean your bolt and area where bolt is (remove bolt, run squeege through) and your all done. Nothing more to clean. By the way, you do not have to clean your gun every single time you use it, only when your gun gets shot, or a million of your paintballs chop.
2007-01-14 04:01:10 · answer #1 · answered by K-Deeznuts 4 · 0⤊ 0⤋
remove barrel, run a squggie through it. You should have some push pins to get inside your gun, You can lube your bolt, and hammer, make sure their is no dirt aywhere in the gun. double check o rings, and make sure you have extra, Because once they go your day of balling is done. Make sure your carful of the tension spring, that adjusts the velocity, If you take the pin out it could shoot out, and maybe you could lose a peice.
2007-01-14 00:56:13 · answer #2 · answered by sdexcalibur 3 · 0⤊ 0⤋
umm i have a tippy and i take it apart wash everything down and then put it back together. i just washed the out side at first but one day i was installing a new part and found paintball all in the indside. it gets there. clean it so it works better, lasts longer.
2007-01-15 16:15:45 · answer #3 · answered by Derek 3 · 0⤊ 0⤋
warm water....buy a squeegee for the barrel...
2007-01-14 00:49:55 · answer #4 · answered by eonetiller 4 · 0⤊ 1⤋