What does my computer need to be able to accept the software for a digital camera?
I have a Finepix A403 digital camera and each time I put the Software disc into my computer the disc just spins around and around and nothing else happens, I even purchased a new disc thinking that the original one was faulty but still nothing, I have also just purchased a usb cable for my Mobile phone + software to download pics, but I have the same problem, so your help would be much appreciated!
Many thanks.
Laymans terms please as this is completely alien teritory for me.
Thanks!
2007-01-12 21:58:57 · 13 answers · asked by Pawstimes16 4 in Computers & Internet ➔ Software
Thanks for all your answers so far, I am going to try some of your suggestions and get back to you.
2007-01-12 22:22:13 · update #1
No luck thus far.
sonysukhi when you say I may need a new drive, did you mean a new Hard drive?
Well I did say this was alien territory!
2007-01-12 22:46:00 · update #2
Just an update, I am going to get a CD rom cleaner to see if that does anything as I am having no luck whatsoever!
Thanks to you all for your help, it's very much appreciated!
2007-01-13 03:10:13 · update #3
Thanks top cat, been there done that, and no instructions on screen, so I think it's a bigger problem, thanks again.
2007-01-18 18:23:19 · update #4
what You need to do, is to go to your main list if programs of installed items: literally, go through EVERY installed main programs, then click also on THE ARROW NEXT the main program you get a sub.program. somewhere you got the program installed, it normally would be there. hidden away, so go get it tiger!!
2007-01-19 13:46:16 · answer #1 · answered by ? 5 · 0⤊ 0⤋
Hi, I don't know much about PCs, but I will do my best to help.
1. If your CDrom is new you have to put the software CD for is to identify.
2. If the CDrom is old, you have to clean it, how? There are some stuff in the markets that help you to do. For example: there are some kind of CD that you put some liquid on it in order to clean.
3.For the usb, if its not working at all, try to install the motherboard CD (Chipset). If it didn't work check the usb conncetion to make sure the connection utself work correctly.
4.Some times you may find more than CD cameras thats for other oprate systems make sure the CD you've got is for your oprating system.
That's all I've got, I hope it helped.
Note: If your usb is built in, you gatta take for a PC shop to check the motherboard.
NEVER formatt your system for such a small problem
2007-01-13 06:23:17 · answer #2 · answered by Diablo A 1 · 0⤊ 0⤋
As you said that nothing happens after inserting a disk then you should go to 'my computer' and then right click on the cd-rom device and select 'autoplay'. if autoplay option is not there then double click on the cdrom. Well if error comes stating you to insert a disk or if a open page opens then their is a fault in the cd rom device, try to clean it using available cd cleaners and if taht doesnt work, the only option is to but a new drive.
2007-01-13 06:09:54 · answer #3 · answered by Er_Jatt (sonysukhi) 2 · 0⤊ 0⤋
Windows XP supports digital cameras without insalling the Camera Software but I think some thing is wrong with ur CD ROM
2007-01-13 06:07:41 · answer #4 · answered by Lancelot 3 · 0⤊ 0⤋
Try backup your important data, then format the computer and reinstall the operating system ( windows or Mac ), then try to install the camera drivers .. it might be because of the OS, or there might be problem with your CD-ROM
2007-01-13 06:11:29 · answer #5 · answered by Luay14 6 · 0⤊ 0⤋
connect up your camera or phone first it will go through set up follow the on screen instructions when it asks for the CD put it in hay presto the problem is the CD will not auto run its not supposed to though
2007-01-18 14:54:26 · answer #6 · answered by top cat 4 · 0⤊ 0⤋
my first move would be to double-click "my computer" and look for the disk in there.. it should be in D: drive or E: drive. Open it and see if there is a way to run it. Oh, and have you tried plugging the camera into the computer with the USB cord?
2007-01-13 06:02:57 · answer #7 · answered by Anonymous · 1⤊ 1⤋
when the disc is in try going start menu, run, go browse, go back until you come to the my computer place. select the drive you put it in. then just run that. that should get the program running. if not contact the manufacture by email.
2007-01-13 06:06:16 · answer #8 · answered by joey 2 · 0⤊ 0⤋
Try accessing your cd rom manually and click on setup.exe in the cd.
2007-01-13 06:03:24 · answer #9 · answered by Anonymous · 0⤊ 0⤋
More then likely somehow the autoplay was turned off,goto my computer right click your cd drives and click autoplay,add the selections.
2007-01-13 06:11:03 · answer #10 · answered by Anonymous · 1⤊ 0⤋