2007-01-12 09:08:49 · 5 answers · asked by Sue 1 in Cars & Transportation ➔ Car Makes ➔ GMC
You have to drop the gas tank out of the car .Then remove the fuel tank sending module.Replace the whole module for about 700 bucks.Reinstall the tank done .Take about 1.5 hours at a shop takes you a weekend at home on your back.Take it in to have it replaced Too dangerous to do to on your back
2007-01-12 09:14:03 · answer #1 · answered by Rudedude 4 · 0⤊ 0⤋
You have to completely remove the whole fuel tank assembly. Hopefully it is not filled with gas as the extra weight of the fuel is one thing, but the amount of fuel is extremely dangerous to handle. It is like a bomb so be careful. Once fuel tank is out, clean off the top of the tank as you don't want a bunch of crap to get into the tank as it will cause further problems. The pump/sender assembly is held in by a snap ring and the plastic pipes are held usually by clips, all have to be removed. the pump/sender will usually pop right out as it is spring loaded, but you might have to wiggle it to loosen the o-ring seal. Now simply replace the whole thing and re-install tank remembering to replace the filter as well. Good luck.
2007-01-13 04:22:20 · answer #2 · answered by Deano 7 · 0⤊ 0⤋
take it to a mechanic because fuel pumps are now located in the fuel tank
2007-01-12 09:16:52 · answer #3 · answered by ken s 6 · 0⤊ 0⤋
When you get the gas tank out, post another note and I'll fill you in from there!!
2007-01-12 09:14:04 · answer #4 · answered by Leadhead 2 · 0⤊ 0⤋
can't I go thru the trunk ?
2015-03-29 06:58:13 · answer #5 · answered by Cathy 1 · 0⤊ 0⤋