...can I simply open the wall, drill holes in the 2x4's, attach recepticles to the 2x4's, and splice two wires off each of the wires of the fixture that's already there and install the new fixtures? Is it that simple? I've installed new lighting fixtures before and have just enough knowledge to make me dangerous!
2007-01-11 10:19:35 · 2 answers · asked by NEWTOME 3 in Home & Garden ➔ Decorating & Remodeling
sounds like you have the basic knowledge. just be sure to use the proper wire and proper sizes. what you most likely have to use is a 14-2 wire, available at any hardware store. when you make your splices be sure to use wire nuts and not just tape. what you are doing sounds ok but what will you do with the box where you made your splice? code states that the box must be "accessible", meaning don't drywall over it and make it disappear. put some sort of cover over it or hang a mirror to hide it. if the splice ever goes bad, it can be accessible for a repair. good luck!
2007-01-11 10:49:57 · answer #1 · answered by Anonymous · 0⤊ 0⤋
sonds like u hv it just use old light wires and put a junction box run all wires in to that starting with the main wires then the wires from ur new lights make sure all same . white wires r conected and all black then grond. good luck very easy use wire nuts and elct. tape
2007-01-11 18:33:57 · answer #2 · answered by kyfixedit 2 · 0⤊ 0⤋