English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

My walls started out neutral white or whatever is on brand new walls. Then when I was 10 I painted them bright yellow. When I was 18 I painted them bright blue. Now I am ready to tone down and go with something neutral or closer to it! Is there anything I need to do to my walls before repainting them? there are areas where there is excessively heavy paint. Do I need to strip them with some chemical or sand them, etc? Help!

2007-01-08 07:03:09 · 8 answers · asked by coconutlove 1 in Home & Garden Decorating & Remodeling

8 answers

Get the primer tinted to your paint color if you have to 2 or 3 coat it , it will save you a few bucks.

2007-01-08 07:07:59 · answer #1 · answered by Anonymous · 1 0

well, that depends on what you want for a finished product. the better the prep, the better the finished job. with ordinary latex paint, you really shouldn't have to do much of anything. scrubbing the walls down with a solution of TSP and warm water, then a rinse will usually do the job. however. if any of the paint is enamel, or has a high gloss surface, a light sanding will help. any drips, runs or splotches that are there now, will show through the new paint, not in color but in texture, if you know what i mean, you shouldn't see the color but the outline of it.

buy good quality paint, you wont have near the problems and wont need so much prep with high quality paint. cheap paint will give you the drips, and yes it will give you the runs, cuz when it gets to be a real hassle to deal with, its the .... well anyway, you wont have to work so hard to cover the walls either, high quality paint will usually do the job in one coat, these days.

if by chance you used oil based paint last time, and want to use latex this time, yeah, you will have a problem with the paint not wanting to stick. sometimes stripping the walls down is the only solution to this problem, but hardly anyone ever uses oil based paint anymore, so i think it is unlikely this problem will exist.

2007-01-08 07:13:56 · answer #2 · answered by tootall1121 7 · 0 0

You can of course say "Let's add another layer, I will strip the paint next time I'll be repainting." But it would be a good moment to do it now.
When your room was first white, was that simply white paint, a white wallpaper or a wallpaper painted white? If there's wallpaper you would have to remove it neatly. That is done easiest by making small cuts through which you can soak the glue. Then you have the choice to start with a new wallpaper, which you can paint or not, or you can simply paint. before using the final paint, you must start with a primer. That you will best tint in the same colour as the final paint.

2007-01-08 07:10:12 · answer #3 · answered by corleone 6 · 0 1

sure you are able to practice drywall over the prevailing wallpaper. in spite of the undeniable fact that, the concern will be with each of the recent dimensions created by way of your new dryway. seem at each of the trim ingredient lengthy and not hassle-free in the previous you settle on to do this. Will you trim favor to be adjusted? Will your door jambs comprehend have gaps? how are you going to regulate all of your electric powered merchants? you would possibly want to easily choose 3/8 drywall in case your going to carry close it over modern. be sure you purchase a good stud finder and properly mark all studs to lock to. If I were you i might want to objective each little thing to get that wall paper off first. Even evaluate hiring a nasty at such issues. in case you've not drywalled in the previous, it really is a discomfort and time ingesting.

2016-12-28 10:03:45 · answer #4 · answered by raper 4 · 0 0

Tint the primer in the color you are going to paint the walls in

2007-01-08 07:51:28 · answer #5 · answered by Anonymous · 0 0

Just put a good coat of primer over them - Kilz is good

2007-01-08 07:06:14 · answer #6 · answered by dani77356 4 · 1 0

you will need to primer before you paint the desired colour,or if you dont it will bleed through.

2007-01-08 07:12:31 · answer #7 · answered by Anonymous · 0 0

Four steps:

1. sand them
2. wash them
3. dry them
4. prime them
5. apply new paint

2007-01-08 07:14:15 · answer #8 · answered by Idle Chitchat 4 · 0 0

fedest.com, questions and answers