question about installing glow pedals & arrow turn signals on 2007 dodge caliber?

Question

i need to know where the 12v power sorce is to install a pair of neon glow pedals and where the left & right turn signal wires are to install a pair of arrow turn signals on the outside mirrors..

Answer 1

Just wire your glow pedals into whichever one of your dash lights is easiest to get to. Then they will come on with your headlights when you turn them on and they will dim along with your dash lights. Check what color your signal wires are at the front signals on the car and trace them up into the car body. You can splice in wherever it is easiest for you and run your wires to the mirror signals from there. Make sure you have good ground connections for everything too. Avoid running things directly off the battery as much as possible. It looks better and works better if you can integrate your add-ons into the factory wiring and fuses.

Answer 2

for the pedals you could run it to a switch, then straight to the battery if you wanted, just make sure you put an inline fuse in first ;)

or if you want to do it the professional way, get a current detector (like 5 bucks at auto zone) and lay down under your steering wheel and look up. Usually there are a bunch of wires, just poke a few until you find the wire for your turnsignals (it should blink in unison with your signals, then tap into that with a tap splice, do the same for the pedals just find a wire that goes off when the car is off, otherwise you'll have a dead battery.

Good luck