English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

how can you break a coconut??...i tried almost everything....please help me....

2007-01-06 03:40:05 · 7 answers · asked by rox_girl 3 in Food & Drink Other - Food & Drink

7 answers

Hold the coconut in the palm of your hand over a sink or large bowl. The bowl will catch the coconut juice when the coconut splits open.
Note the seam that runs between the "eyes." Follow the seam to the equator of the coconut. Using the blunt edge (not the blade)of a heavy knife (i.e. chefs knife, meat cleaver, machete) tap firmly around its equator as you rotate the coconut in the palm of your hand. Continue to tap and rotate until the coconut splits completely open. If it's done right, the coconut will break open after just a few turns into two equal halves.
If you do not have a heavy knife, grip the coconut and firmly tap the coconut around its equator on a hard and solid edge. A corner on a very large rock or brick wall or the edge of a contrete slab works well for this (patio, street curb, concrete stairs). Continue to tap and rotate until the coconut splits completely open.
If you prefer you can drain the coconut juice before cracking it open: Place the coconut on a hard, flat surface that will not be damaged. A sturdy cutting board will usually do.
Find the soft "eye" of the coconut that will be soft enough to push a Philips screwdriver through. If not, get a nail and a hammer to create the hole.
Drain the coconut juice into the bowl.
Follow the method outlined above to split the coconut open.

2007-01-06 03:43:33 · answer #1 · answered by Smurfetta 7 · 2 0

Hammer a nail into the coconut in about three places to drain the milk. Once the milk is drained out, use the hammer to break the coconut.

2007-01-06 13:03:28 · answer #2 · answered by copchick2m7 4 · 1 0

Roxy use a hammer. It is very effective. I see it done a number of ways but a hammer is probably the safest.

2007-01-06 11:46:24 · answer #3 · answered by ? 1 · 1 0

break with a hammer

2007-01-06 11:42:35 · answer #4 · answered by Anonymous · 0 1

use an ax or a hammer

2007-01-06 12:13:19 · answer #5 · answered by blue_Eyes03 2 · 0 0

use a hammer

2007-01-06 11:42:22 · answer #6 · answered by Bignizz66 5 · 0 1

stick dynamite in the holes.

2007-01-06 11:42:19 · answer #7 · answered by Anonymous · 0 2

fedest.com, questions and answers