i have a nissan 240sx and i dont really need roll cages but i have bride racing seats in is there a way for me to put racing harness(seatbelt) instead of having it to a roll cage
2007-01-05 16:29:07 · 5 answers · asked by narbin v 1 in Cars & Transportation ➔ Car Makes ➔ Nissan
I pull out the rear seat belt shoulder belt clamp the retractor with a vice grip locking plier or some clamping device take that tryangle of belts and fasten them with a mountain climber caribean and now throw the top two belts over the seat. hook the lap belts to the original anchors. but don't forget the anti submarine belt drill a hole use grade 3/8" 8 bolts and large flat washers to hold the anchor to the floor middle of the front seat. And don't forget your passenger they need the same belting too. Epecally if you have a driver's instructor in that seat. I auto cross and drive at speed on race tracks with my road car that is how I do it Have fun be safe.
2007-01-06 02:57:48 · answer #1 · answered by John Paul 7 · 0⤊ 0⤋
yes and no..
The reason for the roll cage isn't for a place to mount the harness. It is that if the vehicle does roll over, with a 4 point harness your head and shoulders are locked into position. with a regular seatbelt, I could lean left or right, or foward if the roof was caving in. With a 4 point harness I can't move, and basically would be crushed to ..... as the roof caves in.
2007-01-05 16:52:18 · answer #2 · answered by Bradford K 4 · 0⤊ 0⤋
helpful and no.. the reason of the roll cage isn't for a region to mount the harness. it incredibly is that if the automobile does roll over, with a 4 factor harness your head and shoulders are locked into place. With a typical seatbelt, i might lean left or appropriate, or foward if the roof became as quickly as caving in. With a 4 factor harness i'm unable to circulate, and incredibly might desire to be crushed to ..... because of the fact the roof caves in.
2016-10-30 03:28:09 · answer #3 · answered by Anonymous · 0⤊ 0⤋
well there is a few different things you can do....theres a bracket that goes between the door jams and allows you to bolt the harness to. OR you can mount them to the floor depending on how long they are. You will need to have a backing plate in it though.
2007-01-05 16:53:09 · answer #4 · answered by bornfairview 1 · 0⤊ 0⤋
GO TO ANY SPEED SHOP AND GET THE AP-DER. BRACKETS
2007-01-05 16:35:52 · answer #5 · answered by john p 1 · 0⤊ 0⤋