2007-01-04 14:31:43 · 7 answers · asked by NICK D 1 in Cars & Transportation ➔ Car Makes ➔ GMC
Most had a 4:11. Some had a 3:73. Look for a tag on the diffferential housing.
2007-01-04 14:36:38 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Sierra 3500 4X4 would be a K3500. Actually, the easest way to find out is to call your local GM dealers parts department with your VIN number (or at least the last 8 digits) and ask them to look it up for you. They can tell you by looking up the VIN what gear ratio it is.
Best to call later in the day so they're not as busy.
2007-01-04 14:51:21 · answer #2 · answered by Mark B 6 · 0⤊ 0⤋
If its an automatic it should 3:73 standered 4:10 gear's or 4:11
2007-01-04 17:30:00 · answer #3 · answered by icddppl 5 · 0⤊ 0⤋
that is definitely one of three ratios. My 1999 2500 w/ a 6.0L has 3.forty two's (doing 70 it purely runs 2000 RPM's) yet in addition they did 3.seventy 3's and four.11/4.10's (can't keep in mind which, besides the undeniable fact that that is close adequate).
2016-12-15 16:01:40 · answer #4 · answered by allateef 4 · 0⤊ 0⤋
4.10 for this one unless ordered special with 3.73 the only way to know for sure is to look for the gear ratio tag or trust that the VIN is correct, no one changed the gears and look it up.
2007-01-05 17:19:10 · answer #5 · answered by ben e 3 · 0⤊ 0⤋
the easiest way to fin out is count the rotations of your drive shaft to your axle for instance if your axle turned once
and your drive shaft turned 3.5 times than your gear ratio would be 1: 3.5 hope that helps oh the wheels have to be off the ground
2007-01-04 14:44:54 · answer #6 · answered by Fred S 5 · 0⤊ 1⤋
4.11 or 4.10
2007-01-05 16:07:10 · answer #7 · answered by Anonymous · 0⤊ 0⤋