when i press the break the brake lights do not go on. but when i put on the hazards they blink. i checked all the bulbs and everything, i also tried shorting the two wired that go to the break switch and they STILL don't go on!!! i checked all the fuses! WHAT DO I DO am i missing something!!??
2006-12-30 06:11:58 · 4 answers · asked by zeckn0md 2 in Cars & Transportation ➔ Other - Cars & Transportation
Broken wire or disconnect somewhere in the path?
2006-12-30 06:13:14 · answer #1 · answered by Anonymous · 1⤊ 0⤋
I would replace the turn signal flasher. The hazard flasher is on a separate circuit. The turn signals also are related to the BRAKE ( note spellong) lites.
2006-12-30 14:23:23 · answer #2 · answered by tronary 7 · 0⤊ 0⤋
yea, few things to chech, the fuse on the side panel by the dryerside door, direct tail lights, wiring harness, or circuit breaker.
2006-12-30 14:21:19 · answer #3 · answered by SPC Monty 2 · 0⤊ 0⤋
I wonder if theres a ground wire off someplace.
2006-12-30 14:14:23 · answer #4 · answered by steve 5 · 0⤊ 0⤋