what is a good electric circuit or relay drafting program & simulator?

Answer 1

I used Orcad for a number of years. It also has simulation packages available, but it's not cheap, as in a hobyist product.

If your circuit is a relay-only circuit, it could be modelled with PLC software. If it's fairly simple, you probably could understand it fairly well with a good layout of the schematic.

Relay circuits are usually laid out using what's called "ladder logic". This method really helps the user understand what will happen both physically and temporally. If you're going to do more than one design, it's worth understanding.

Answer 2

The benefit to applying larger voltage is that it enables you to apply a extra robust capability for the comparable modern. oftentimes, you in basic terms see 220 volt home equipment as ones that draw a great quantity of capability, which includes dryers, water warmers, and ovens. There are various issues you ought to evaluate relating to the table observed in the previous you agree directly to purchase the two unit. a million. What else do you propose to placed on the circuit? i offered a one hundred twenty volt air compressor, even if if it attracts 15 amps, so i can't have something on the circuit or the breaker journeys. in case you propose on having a woodworking save (or perhaps in basic terms a freezer interior the storage), then you definitely might desire to evaluate the 220 volt sort. 2. Do you have a 220 volt line the place you propose on applying the observed? 220 volt circuits are extremely uncommon interior the domicile, being got here across in basic terms interior the kitchen and laundry room / water heater closet. you ought to no longer use an extension cord with 220 volt merchants (i do no longer think of they even make extension cords for 220V), so which you may desire to to look at the place you are going to be able to desire to place a table observed in the previous you agree on on the kind. 1HP is 1HP. there is not any longer any difference so a procedures as motor output or performance for one hundred twenty or 220 volt structures. you may get a extra useful, extra trouble-free commencing 120V motor in case you used 3 section AC capability, yet 3 section strains are not run to very own properties. it is in all probability what you're questioning approximately. usual, in case you have a 220V outlet someplace it may be clever, i might choose for the 220V sort. The 120V fashions draw extra modern and then shrink what else may be used on the comparable circuit.

Answer 3

If money/accessibility is no factor, I'd say Electronics Workbench, Multisim. It has wonderful graphical interfaces, simulation characterisitcs, and portability features. It's very interactive too.

'makes building things fun.