which amp should i buy for 2 rockford fosgate 4 ohm DVC subs 10 inch???

Question

Capable of handling 500 watts (peak) and 250 watts RMS (continuous)




Injection-molded polypropylene cone with poly foam surround




Dual-stacked 60-oz. magnet




18-gauge precision-stamped steel basket




2" anodized aluminum voice-coil former




Nickel-plated, spring-loaded compression fittings




Cosmetic motor cover can be removed when additional mounting clearance is required




Ported or vented options allow for versatile installation




Sensitivity: 85.5dB




Impedance: 4 ohms

Answer 1

An amp that's 500 watts RMS @ 4 ohms and wire the subs like so: http://i81.photobucket.com/albums/j230/sparky3489/PARALLEL-SERIES.jpg

Answer 2

Kenwood KAC 9102d 500 RMS x 1 @ 4ohms 850 RMS x 1 @ 2ohms That should be plenty for the 10's. Runs around 190 bones.

Answer 3

Some really good stereo shops let you listen to the subs but if not i would look into polk audio, Memphis audio or boston Acoustics.

Answer 4

if you are looking for cheap this will get the job done http://www.crutchfield.com/S-COSLCpl4XKN/cgi-bin/ProdView.asp?g=120&I=028V108XT&search=amp
if money isn't a problem this will work
http://www.crutchfield.com/S-COSLCpl4XKN/cgi-bin/ProdView.asp?g=120&I=575P4504&search=amp
or
http://www.crutchfield.com/S-COSLCpl4XKN/cgi-bin/ProdView.asp?g=120&I=575P5502&search=amp
maybe even this
http://www.crutchfield.com/S-COSLCpl4XKN/cgi-bin/ProdView.asp?g=120&I=575P6001BD&search=amp
you may want to look at this if none of those are working for you
http://www.crutchfield.com/S-COSLCpl4XKN/cgi-bin/ProdView.asp?g=120&I=500MRDM105&search=amp
you would just want to keep that last one listed turned down some. you will want to run your subs 8ohm each and bridge the amps