step by step diagram would be helpful
2006-12-26 10:21:44 · 4 answers · asked by Casey C 1 in Sports ➔ Outdoor Recreation ➔ Hunting
Unscrew the forend and go through the back of the stock to unscrew that part.
2006-12-29 05:50:09 · answer #1 · answered by wall_id_pike 3 · 0⤊ 1⤋
You'll need a stock wrench for the pump grip to get the nut off. the rear stock is removed by removing the recoil pad and unscrewing the long screw you'll find under it. Make sure the shotgun is unloaded of course. To remove the front pump grip, 1st cycle the action back and leave action open, unscrew the retainer cap on the magazine tube and remove barrel. Using stock wrench, remove the stock nut and remove front pump grip.
2006-12-26 18:37:08 · answer #2 · answered by boker_magnum 6 · 1⤊ 1⤋
Boker_mag nailed it.
Emphasis on assuring that it is unloaded.
The link below is to a schematic that might help.
Good luck!
2006-12-28 10:56:23 · answer #3 · answered by BeRotten 3 · 0⤊ 1⤋
You can download a owner's manual for this shotgun for free at www.remington.com.
2006-12-26 19:59:05 · answer #4 · answered by johndeereman 4 · 1⤊ 2⤋