How do you hook up an amp to a sub woofer and head unit?

Answer 1

Go to crutchfield.com, They have inexpensive books that will guide you thru this.

Answer 2

OK, this is a long process, but i will try to make it as short and understandable as possible. Amp: red wire to the battery, make sure fuse is in between the battery and your amp, black wire is ground, try to loosen a bolt under the seat, or if in the trunk, a bolt on the floor of the trunk, trunk latch, (try to hook this wire up last, so you can test the location). blue wire, goes to the memory wire on the back of the radio, usually its red, if not connect it to the radio fuse in your car, just wrap the ire around one of the prongs of the fuse and plug it in. red and white audio cables connect directly to the back of your head unit, if it has the pre-amp output. If not, u will have to buy a line converter. speaker wire goes from amp to sub, if your amp is powerful, bridge the wire on both channels for more power to the sub. as far as the head unit, make sure you have the wiring harness for your model car, and from there, its just matching all the colors, wrap them individually with electrical tape or solder them and buy electric wire caps, then plug in the to ends of the harness! Good luck beatin' the block down!

Answer 3

I think the best answer for your installation needs would be to try www.installdr.com I've used this site for years for finding parts and help on installation.