I want to hang a platter on the wall.....How?

Answer 1

If you’re inspired to display your favorite plates on the wall, make sure the hangers that support them don’t detract from their beauty. You can buy them in Walmart, or else make your own to accommodate any size or shape you want to display.

To make hangers, start with annealed iron wire, such as 18-gauge. This wire is particularly soft and pliable and can easily be manipulated to fit around any plate. Using wire cutters, cut two pieces of wire 3 inches longer than the diameter of your plate. Bend one piece into a V shape. Twist the second wire to make a loop in the center; this loop will be used to attach the hanger to a wall hook. Feed one end of the V-shaped wire through the loop. The V should hang upside down and rest on the bottom of the loop. Twist the V wire around itself once to secure. Position the wires on the plate so the top of the loop hits the edge of the plate’s base. Holding the wires in position, wrap each one tightly around the rim to the front of the plate. Clip the ends of the wire to a uniform length. Using small needle-nose pliers, twist the ends around to form a decorative loop. For very large or heavy plates, additional wires may be necessary.

Answer 2

If your platter has any value, don't use plate holders. They will eventually wear the decoration off the platter and reduce its value. Buy a small wooden easel and have the platter displayed on a table or hunt board

Answer 3

HAHA! I had to benefit the question 2 instances, interior the initiating up i concept, oh, on no account recommendations. fowl or seafood, is severe-severe high quality, and to drink, weight-loss plan Coke or iced tea, or whats up, i flow to flow wild, a million/2 a can of beer. come approximately the music!

Answer 4

you buy a plate holder thingy (it's metal with like hooks to hold the plate and a way to hang it). That's what i've seen. probably from hobby lobby or michaels or someplace like that.

Answer 5

There's plate hangers made specifically for that purpose. I think any arts and crafts store (or any place that sells picture frames) will have 'em.

Here ya go:

http://www.hooksandhangers.com/

Answer 6

You need to purchase the hanger. It will have the proper fasteners with it, and installation tips.

Answer 7

get those hangers that guy keeps screaming about on the tv commercial. it looks like a good system.
www.herculeshook.com

Answer 8

this will probably require a trip to the hardware store, tell them what you need to do and they will fix you up