My power lock moter doesn't work anymore. Does anyone know how I can remove it ..
2006-12-24 11:05:25 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Dodge
There isn't a motor for your power lock. It's mainly an electronic switch with a relay.
There could be a few different reasons on why it's not working, bad relay, bad connection between the switch and the actuator. A pretty novice mechaic with a voltmeter maybe able to test out the connectivity, but if it's the actuator, you'll fair better having the dealer open your door up.
Good luck.
2006-12-24 11:12:06 · answer #1 · answered by xtrusoldierx 2 · 0⤊ 1⤋
Remove the door trim with a pad tool, and gently peel back the watershield. Follow the rods that work your lock to a soleniod with several wires sticking out of it. You might want to test it before condemning that motor. Try jumping it a twelve volt source. Sometimes the wiring will wear out where it goes through the door and break in two. Check this as well .
2006-12-24 15:42:20 · answer #2 · answered by Anonymous · 0⤊ 0⤋
For starters, the motor might not be the problem; it could be something as simple as a bad window switch, or a loose/broken wire. My advice would be to take it to a good mechanic or a Dodge dealer and have them inspect it for you. Many places will diagnose the problem for little to no cost. Hope this info helped.
2006-12-26 08:30:11 · answer #3 · answered by answerman63 5 · 0⤊ 0⤋
Check fuse cavity #3. It's blown!
2006-12-26 12:29:52 · answer #4 · answered by delux_version 7 · 0⤊ 0⤋