I am building a magnetic compressed engine?

Question

I am building a magnetic compressed engine that will run a poll reverse gate in the cylinders that can allow the adjustment of reverse poll magnetic compression with a electric acelerator module to change the revolutions of the motor .Can any one help myself with suggestions of light materials such as alloys that need too adapt too wear in the engine as heat stress is no factor in this motor.

Answer 1

You are making a motor, not an engine (engines run on fuel, not electricity) The biggest wast of energy you have is pistons. If you are talking about a variable (electric) valve engine, that has already been done.

Answer 2

Why do not you try utilizing the flexibility of prayer to make the airplane fly? basically kidding. No such element as a magnetic motor. Rubber band planes are elementary, yet there's a reason behind that. Rubber bands have the superb power and power density, apart from compressed air, yet you at the on the spot are not allowed to apply that. After rubber bands comes metallic springs, like you may locate in a mouse capture.

Answer 3

I'd like to help but if heat stress is no factor build it out of paper.

I'm trying to comprehend how such a device would even run, seems to me it would just stall out, unless you apply electrical power. In that case it would really just be an electric motor a reciprocating electrical motor at that. Which I don't think would be as good as the rotary motors we already have.

Don't let me discourage you though, but I'd go back to the drawing board on this one.

Answer 4

Teflon is an excellent material, and can act both as a lube, and coating for metals . It also will not diminish the affect of the magnetic fields as long as it is a relatively thin coating. there was some experimenting also with ceramic blocks a few years back