Hold a knife blade at about a 30 degree angle against the whetstone; this means the back of the blade will be tilted off the stone about 1/3 of the way vertical. Push the blade along the stone as though you were slicing a layer off the top, or move the blade in a circular motion. Sharpen the other side in the same manner. Wipe the knife with a clean cloth and examine the edge of the blade in the sun or under a bright light. A dull cutting edge reflects light and looks shiny.Sharp edge is so thin it has no shine at all.
To sharpen an Ax, use an 8-10 inch mill bastard file. Secure the ax head on the ground b/t a log (6 inches in diameter) & 2 wooden pegs or tent stakes. Place the file on the edge of the blade & push it into the bit. Use enough pressure you can feel the file cutting into the ax metal. Lift the file as you draw it abck for another stroke. A file sharpens only when you push away from the tangs. Sharpen with firm, even strokes, then sharpen the ohere side the same way
2006-12-22 12:26:13
·
answer #1
·
answered by stacypeacock1967 3
·
0⤊
0⤋
A stone is used to hone the edge of a blade to a sharp burr free cutting edge.A wet stone is a stone to be used with a honing oil.The process is done with lubrication to achieve a smoother edge.Moving the blade across the stone at the propper angle 30 deg is important.If you are constantly changing angle while you sharpen it will never achieve a keen edge.
2006-12-22 11:48:10
·
answer #2
·
answered by upforitupforitupforitupforitru 3
·
0⤊
0⤋
I dont know how to use a whet stone but I take my knives to butcher and have him sharpen them for me that way the last a long time if you treat your knives correctly.
2006-12-22 11:45:11
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
Wet stones are for the final stages of sharpening a knife. you can use water or a light oil(cooking oil, wd-40) dry stones are used first to rough out the blade.
2006-12-22 11:55:21
·
answer #4
·
answered by quick8stang29 2
·
0⤊
0⤋
It's called a whet stone. You place it on the knife blade and made circular motions to sharpen the blade. Do not put it on the sharp part of it will dull it.
2006-12-22 11:50:05
·
answer #5
·
answered by beez 7
·
1⤊
0⤋
Oil will be more beneficial at scuffling with rust, even although to by way of its ability to make one floor slide a lot less difficult over the different it may also make it somewhat harder to sharpen. There are elements that you may upload to the water to assist save it from rusting. also, you need to apply distilled water. Distilled water received't reason oxidation. besides the indisputable fact that, it should be an excellent theory to coat the knife with oil after utilizing distilled water to sharpen it and drying it off. this would help positioned a small oil coating over the newly uncovered floor so as that the air received't reason it to rust.
2016-12-01 02:31:50
·
answer #6
·
answered by ? 4
·
0⤊
0⤋
Better get your daddy to show you. You'll end up losing a fingertip if you're not careful.
An Arkansas soft and spit. Been doing it for 40 years.
2006-12-22 11:50:29
·
answer #7
·
answered by Anonymous
·
0⤊
0⤋
kind of hard to explain, a place like walmart has inexpensive wetstone sets on the shelf. excellent to learn with. look in the hunting section.
2006-12-22 11:44:38
·
answer #8
·
answered by Anonymous
·
1⤊
0⤋
it sharpens a knife
2006-12-22 12:09:57
·
answer #9
·
answered by WhatNever 2
·
0⤊
0⤋
tooth paste
2006-12-22 11:43:39
·
answer #10
·
answered by InFo 2
·
0⤊
0⤋