2006-12-22 10:53:15 · 8 answers · asked by Silent Unknown 1 in Cars & Transportation ➔ Car Audio
sorry / makes a a very low (high bass) pop
2006-12-22 10:54:59 · update #1
CHECK the wires and make sure nothing is lose or touching.
2006-12-29 06:56:20 · answer #1 · answered by MR.B 3 · 0⤊ 0⤋
Metalman56 lined it exceptionally solid. in reality with out a sub, you received't have a vehicle which will "shake with music and bass" . so that you want a sub. as for 3 way vs 4 way, it really is a call and also you want to hearken to them, its kinda like asking that's more desirable the pink vehicle or the blue one... if you're really after sound high quality, i'd propose getting a round speaker for the 4 significant audio device. in case your modern-day audio device are 6x9 there are adaptor plates obtainable at a superb vehicle audio keep to in good structure a 6 a million/2" round in that area. a 6x9 will supply more desirable bass yet sound worse than a 6 a million/2" regardless of the indisputable fact that the shortcoming of bass is a non problem at the same time as extra a sub, because the bass frequencies will be "reduce off" from the mains besides, and redirected to the sub. in case you opt for to commence off sluggish i'd get a 4 channel amp, a sub and a pair of new audio device up the front, i recomend a ingredient set with a seperate woofer and tweeter. with those aspects you would makes use of the deck to ability the rear production unit audio device, then 2 of the channels to ability the hot the front audio device and the different 2 channels would bridge to ability the sub. this can supply complete frequency sound at the low-cost cost. in case you wanting to operate more desirable ability and more desirable quantity, all aspects would nonetheless be usable, basically purchase 2 new audio device for the decrease back and ability all audio device with the 4 channel amp, then upload a sparkling mono amp for the sub. in case you bypass this route, basically confirm the sub can carry countless ability for a destiny improve. i'd seem right into a 50x4 as a lot as a seventy 5 x 4 amp, and round a 400-600 watt sub. this is a effective device with out significant electric powered device enhancements.
2016-10-16 21:14:00 · answer #2 · answered by ? 4 · 0⤊ 0⤋
The popping is caused by the voltage changing instantaneously. A simple way to fix this would be to add a capacitor in between the amp and the power source. Voltage cannot change instantaneously across a capacitor, thus eliminating that problem. A 5 micro Farad capacitor is what i think is usually used.
2006-12-22 14:10:52 · answer #3 · answered by Tyler H 3 · 0⤊ 0⤋
Yeah my 2 12s used to do that before. I suppose you could get a higher farad capicitor. Better yet if its really bothering you, you have to get an amp wit a feature called Anti-thump turn on. That will eilimiate it I believe.
2006-12-23 03:05:55 · answer #4 · answered by stillcole 2 · 0⤊ 0⤋
Try checking your ground wire. Make sure it's at least 6 inches from the amp and the connection is tight and paint free.
2006-12-27 13:58:22 · answer #5 · answered by dopeweed 1 · 0⤊ 0⤋
sounds like you need a better ground for your amp
2006-12-27 15:22:38 · answer #6 · answered by master l 2 · 0⤊ 0⤋
its just the power coming through when u turn it on
or there blown out(shot)
2006-12-22 12:02:40 · answer #7 · answered by Anonymous · 0⤊ 0⤋
sound like the cones might be shot.
2006-12-26 02:30:36 · answer #8 · answered by Urban Informer 3 · 0⤊ 0⤋