English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

i have a M29 spring pistol and after a few shot some pellets got stuck in it so how do i take it out?

Also if u get shot with it and ur wearing a short sleeve 5 ft away and u get shot it hurts but if ur wearing a sweater and a short sleeve or a hoodie then you just feel something poke u, also after it goes like 20-30 ft it just drops to the floor so it doesnt really go that far so my question is that what do u think the speed probably is for the gun?

2006-12-21 15:57:59 · 5 answers · asked by rubixmaster 1 in Sports Outdoor Recreation Hunting

5 answers

sounds like you got a pretty crappy gun if it drops after only 20 or 30 feet, but then again it's a springer, the low man on the totem pole so to speak, in airsoft.

to unjam it don't take your gun apart. remove the magazine and use a cleaning rod or just a long thin stick and poke down the barrel, it should knock the bb's out.

as for FPS you're probably shooting about 130-150 feet per second. i had a mini electric (a loooong time ago) that shot 115 and was a little weaker than what you're describing and a 180 you can feel relatively strong through a hoodie so 145 ish is a safe bet.

i cant tell you much beyond that i haven't had a weak gun like that in a long time, my latest gun does over 400 fps (which is crappy for a sniper but oh well it's my first snipe.)


if the unjamming meathod dosen't work see if you can get a hold of an aircompresser to blow it out (that's what i do when my aeg jams up) and then when you'r done get either a can of silicon or teflon spray from wallmart or a guns or sporting goods store and spray some down the barrel, it'll never jam up again.

2006-12-22 07:30:22 · answer #1 · answered by Ian F 4 · 0 0

DONT TAKE APART UR GUN!!!!!! if u dont know what ur doin ull break it, i learned the hard way, just take out ur clip and pull the slide back, while the slide is still back, point the muzzle towards the ground and shake it rapidly, if it doesnt come out of the barrel do the same thing but leave the gun horizontal, and hopefully it will come out of the where u put the clip,also take some shots inbetween shaking it. also to aviod having ur gun jam again, always make sure u pull the slide all the way back and have it go all the way forward, the fps (feet per second) is how strong ur gun is, it should say on the box or something, but if it drops after 20-30 feet its prolly like around 100-150, i would go to shortyusa.com and pick out a good gun, you could get a decent pistol for 20$ that has around 200 fps and wont drop for 100 feet, and it practically wont jam at all, hope i was some help

2006-12-22 10:01:07 · answer #2 · answered by forgetforlornforeverforgive 2 · 0 0

I'm not sure if it is worth it to you, but http://www.airsoftpacific.com/viewtopic.php?t=9153
is a decent guide to crono you're guns.

Also I would like to note that you ONLY want to you 100% sillicon spray because the oils many gun oils will eat the plastic.

2006-12-23 20:39:50 · answer #3 · answered by Anonymous · 0 0

k i think you have a plastic bb gun so what u do is remove the top part towards the back by removing the screws then split the top part in half and remove the clog of bb's and put the top part back on and put the screws back on. and your done

2006-12-22 00:08:25 · answer #4 · answered by vash98mm 2 · 0 0

probably 30 or 40 feet a second.

2006-12-22 00:09:23 · answer #5 · answered by Fled Nanders 2 · 0 0

fedest.com, questions and answers