how do I program a hitachi CLU-5713TSI remote control to a jvc dvd player?

Answer 1

Mfgr website wil have instructions.

This is from page 30 of the manual. Thie remote came with a TV and the instructions are in the TV Manual.

This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system of
your DVD player. (refer to page 32 for pre-codes)
1. Turn ON your DVD player.
2. Aim the remote control at the front of your DVD player.
3. Press and release the DVD button to switch to DVD pre-coded mode.
4. Hold down the DVD button on the remote and enter the two digit preset code that matches your DVD player, as shown on page 32.
The indicator light will flash 3 times if the code was accepted.
5. Aim the remote at the DVD player and press the POWER button. The remote will turn off your DVD player when the correct two
digit preset code is entered. When this occurs, the remote control is programmed for your DVD player. If the DVD player does not
turn off, try a different two digit preset code.
6. The remote will now control your DVD player.

the codes for JVC are 2, 14, 26.
Try each code using the above seuqence until you get the unit to work.