What kind of heater is the best for a garage? A forced air tube style or a convection style?

Question

I went to Menards and bought a remigton tube style that is 30,000 to 55,000 BTU's but they had a convections style that was 40,000 to 80,000 BTU that would heat 1900 sq ft and the Remington heated 1500 sq ft and my garages is 1550 sg ft. The tube style looks like it would heat up faster and last a little longer. It was $140, should I take it back and get the other one(convections style that looks like it has no fan) which throws heat 360 degrees instead of one way for $99? Thanks for any help.

Answer 1

It is best to get the right size for the area you are heating. The forced tube heater will heat quicker for the size and use less fuel but the convection heater will heat more efficiently during the long term. I would look and make sure the application is safe and you don't need additional ventilation. A convection heater uses the natural air current to heat as heat rises the cold air falls. The good thing about the forced air heater is that it will circulate the heat a lot faster. Most construction sites use the forced air but either should heat just fine.

Answer 2

forced air warmth is commonly speedier, yet as its call shows, it heats the air. in the adventure that your storage is drafty, then you definitely'll lose lots of the warmth quickly and would desire to run it extra commonly. Convection style warmers are extra suitable in drafty areas for the reason that they warmth slowly warmth up the air besides because of the fact the forged factors (fixtures, partitions, home equipment, and so on.). those issues preserve warmth extra suitable, so drafts should not be as much as a concern. the alternative is as much as you. speedy yet tormented by drafts or sluggish and extra stable.

Answer 3

A forced air tube

Answer 4

I would go with the convection style heater. Convection style heaters are more efficient in my opinion.