i start my computer, after it loads everything up and right when windows starts to load. a blue screen comes up it says to check all new hardwares that i installed but i havent installed any. there is no way of goin to safe mode bkuz when i try. it goes to the blue screen again. how can i go around this.
2006-12-20 11:38:21 · 5 answers · asked by aziz 1 in Computers & Internet ➔ Other - Computers
Open up your computer case and check all your connection. Make sure eveything is tight. Remove the video card and put it in back again. One of more hardware in your pc does not sit tight in the slot. While you're in there get a can of compressed air and spray inside your case to get rid of all the dusts. Use short burst.
2006-12-20 11:48:18 · answer #1 · answered by Ted B 6 · 0⤊ 0⤋
so a procedures as i understand you may't keep the files, yet to save the computing gadget you need to unplug the difficult force and positioned it in yet another computing gadget, wipe the difficult force and use fix disks to positioned an operating equipment Vista, XP, on the difficult force. Then positioned it decrease back in the different computing gadget.
2016-12-01 00:40:23 · answer #2 · answered by minogue 4 · 0⤊ 0⤋
If your computer is not working properly while you are working on it, it could be a problem with device drivers, hardware or software.
Detailed instructions at http://tinyurl.com/yk5zpr
2006-12-21 22:12:24 · answer #3 · answered by gira 3 · 0⤊ 0⤋
Format and do clean installation.
2006-12-20 11:42:08 · answer #4 · answered by Anonymous · 0⤊ 0⤋
listen to that guy or call the computer company
2006-12-20 11:45:38 · answer #5 · answered by G 0324 2 · 0⤊ 1⤋