new battery, ignition switch,bat cables, fuel filter, the fuel shut off is not tripped, but i cant find a fuel pump relay or figure out where the power comes from there has to be a fuseable link, or relay for that circuit doesnt there?also i checked spark is good at coil and at distributer. fuel is getting into fuel rail but not thru injecters, maybe no power to injecter if on same circuit as pump
2006-12-19 11:49:20 · 4 answers · asked by stylestealth 2 in Cars & Transportation ➔ Car Makes ➔ Ford
the relay is located on the fire wall i think this is what might be causing yours not to start,,i own a repair shop,and i have did a few of these before,,you, have already narrowed it down,that's good most people don't know to do that,,it may be the relay out on it,,have some one turn the key on ,and feel the relay,,you,ll feel a small click,if it tries to kick in,,this is how i find them,but i think its the third one over ,against the fire wall good luck with it,i hope this help,s.,,have a good x-mas.
2006-12-19 11:58:19 · answer #1 · answered by dodge man 7 · 0⤊ 0⤋
You will need to check the fuel pressure at the fuel rail, if the pressure is correct, you can rule out a fuel pump or pressure regulator issue. The injectors are computer controlled and on a different circuit that the fuel pumps.
2006-12-19 12:05:34 · answer #2 · answered by Anonymous · 0⤊ 0⤋
injectors are obvisouly not firing, try to see if there is something on the bronco that specifically controls those injectors. See how many PSI you are getting at the rail. the pumps are working if you have fuel at the rails.
2006-12-19 14:35:01 · answer #3 · answered by ironh19 3 · 0⤊ 0⤋
fuel pump works of a module bolted on the side of the distributor. it also has a linka fuse on the passenger side by seloyd spelled right i quess.
2006-12-19 12:00:01 · answer #4 · answered by lmw 2 · 0⤊ 0⤋