How much would it cost to get a cerpentine(I think that's spelled right ) belt fixed on a 1987 Ford F-150.
2006-12-19 09:45:01 · 7 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Ford
The belt will probably cost you about $20 +-
A friend could put it on for you in about 3 minutes. I have replaced two on my F-150.
Hint: If you get it at Autozone, you can get one with a lifetime warranty and if it ever breaks again, they will give you a new one.
2006-12-19 09:49:03 · answer #1 · answered by Anonymous · 0⤊ 0⤋
sure your precise, take to a various save a ball joint is a ball joint , is the motor vehicle 4x4 ? no count if that's you have kink pins if no longer it has a-hands with 2 ball joints(top and decrease) and that they'd desire to truly understand a thank you to income for undesirable ball joints you're suitable ,must be the a-arm bushings and the are like a Chevy very comparable and the twin I beam replaced into stopped in 1995 some fashions have been slipped through with I beams, yet all and all there in basic terms like your old Chevy, my 2 fords truck have the final twin I beam's and characteristic a stable front end save look at it on a front end aliment device, they'd with the burden on the motor vehicle verify the motor vehicle, in maximum situations would desire to have the burden of the motor vehicle on em to income em no longer in all case yet in this device you will see the play if any it won't have the skill to get a alignment , because of the fact to lots play and or it must be frozen and a great type of save that I even have stumbled on at present are insufficient for suitable diagnoeses, they in basic terms decide directly to sell factors, whether they do no longer understand you sound to me you very acquainted with motor vehicle and don't enable every person inform you diverse , in basic terms discover the suitable save get it appropriate clinically determined , great question take care, hop you may get it fastened the place you reside,
2016-12-15 04:31:17 · answer #2 · answered by ? 4 · 0⤊ 0⤋
20-30 bucks for the belt.
10-20 minutes to put it on
30-50 bucks total before tax
2006-12-19 09:49:41 · answer #3 · answered by Anonymous · 0⤊ 0⤋
You can't fix it. Get a new belt,and,it's fairly easy to install with basic tools.
2006-12-19 09:52:08 · answer #4 · answered by johndeereman 4 · 0⤊ 0⤋
belt $15-$30
labor $50-$120 hr
not doing it your self
PRICELESS
2006-12-19 09:50:38 · answer #5 · answered by PAYME 1 · 0⤊ 0⤋
the belt is about 40 dollars(canadian)...
.3 of an hour to replace..26 dollars canadian..
Does this truck have an automatic tensionner?..check it to see if it is siezed up...
2006-12-19 10:09:19 · answer #6 · answered by iusedtohavehair 3 · 0⤊ 0⤋
A serpentine belt is not reparable, just replace it and the tensioner :(
2006-12-19 10:36:47 · answer #7 · answered by mustangmanll 3 · 0⤊ 0⤋