English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2006-12-18 19:42:55 · 11 answers · asked by Anonymous in Home & Garden Decorating & Remodeling

11 answers

I used my mowing machine and a bottle of turps last time. You have to set for a close cut. It worked very well.

2006-12-20 04:06:35 · answer #1 · answered by emaxtde 2 · 0 0

I agree with the above to an extent, it is water based so water alone should be your first stop before adding anything into it, then a little soap, maybe then add a bit more.

The best thing is to speak to the companys Help Line, they nearly all have one that's free and the details are on the tin it'self.
Most are open mon to fri normal working hours.

The reason you should phone them is because emulsion is not emulsion, all companies in the fight to reduce costs use diffrent chemicals and the reaction of this mix to other chemicals such as soap can be diffrent from one to another.
One person might have successfully cleaned Crown paint in a particular way for years but it might ruin the carpet if it was Dulux paint for example.
One the manufacturers know what they used and it can change from year to year/ range to range.

2006-12-18 20:04:49 · answer #2 · answered by Anonymous · 1 0

depends whether its wet or dry. If wet lots of water if dry you are in abit of trouble as emulsion is extramly difficult to remove - soap and water is you only hope.

Tip: when painting with gloss paints always keep a tin of swarfega - you know that green gluppy hand cleaner stuff - close by as this will remove WET gloss paint from cartpets, furniture etc and can itself be washes off with water.

2006-12-18 19:51:32 · answer #3 · answered by Anonymous · 1 0

I think prolonged soaking is the only thing that will remove water based paints, but coloured emulsion will prove very difficult.

2006-12-18 19:58:34 · answer #4 · answered by Spiny Norman 7 · 0 0

You could try carpet cleaners and depending on the colors of the paint and carpet and the type of carpet you might get it to be less noticeable, but whenever I come across that we end up just doing a patch...

2006-12-18 19:54:45 · answer #5 · answered by Anonymous · 0 0

I would try using steam, the emulsion will soften once heated, then use a steel brush to remove it. Good luck.

2006-12-21 11:04:39 · answer #6 · answered by AT 2 · 0 0

If the paint is dry and hard....and the carpet is not WOOL or very dark in colour....use a medium sandpaper wrapped around your finger tip. Gently (and I mean GENTLY) rub slowly. It will take time but will remove the emulsion from the upper piles. Please, Please, PLEASE....DON'T rub really hard..........you'll screw up your carpet.

2006-12-19 23:13:57 · answer #7 · answered by jamand 7 · 0 0

Try a solution of washing up liquid and water. No guarantees this won't make it worse though.

2006-12-18 19:45:35 · answer #8 · answered by Anonymous · 0 0

you may attempt some rubbing alcohol and notice if which will help get it up, ought to take some elbow grease...saturate the section good with the alcohol and scrub good...blot up extra with a prior towel or paper towels...

2016-10-15 05:36:12 · answer #9 · answered by Anonymous · 0 0

sulphuric acid?

2006-12-18 20:51:48 · answer #10 · answered by Anonymous · 1 0

fedest.com, questions and answers