how is beer made?

Answer 1

Grain, yeast, sugar water

Ancient Egyptians made beer from fermented bread and honey

Answer 2

Allow grains of Barley to start to germinate. Stop germination by drying with heat. (Amount of heat governs colour and flavour of beer). Crack grains. Soak grains in water at about 150 degrees F for about 90 mins to extract malt sugars. Strain off liquid. Boil liquid with hops for about an hour. (Hops are the flower of the hop plant {related to canabis!} that act as a preservative, clarifying agent and flavouring). Cool to room temperature. Add yeast. Ferment. When fermentation has more or less finished pour beer into casks or bottles. Leave to settle/mature. Pour out and drink. Simple! Or it should be. Inferior beers (that's most of them) are filtered, pasteurised and carbonated like lemonade. Some brewers use dubious additional ingredients such as rice, maize or sugar and dodgy chemicals. Sugar certainly is not a requirement for brewing. Indeed in Germany, by law, any beers brewed there for consumption within the country can only contain water, malt, hops and yeast. Similar law applies on Isle on Man, with the addition of sugar as a permitted ingredient.

Answer 3

Beer is fermented "flavoured" water into which has been added the produce of boiling hops and/or malt and also sugar - using yeast to produce the fermentation process. The mix has to be kept at quite a warm temperature in order for the yeast to work. The alcohol eventually kills the yeast or at least prevents it from continuing - plus when there is no sugar left - the dead yeast will sink to the bottom and the rest of the liquid (beer) is carefully removed. There will be a purification process using "finings" to clear the beer too - plus maybe it is served with added CO2 (keg beer) - some other stuff but that is the basics for you

Answer 4

It depends on the beer. Some (like Bud) are made using rice. Traditional beer uses malted barley, water, hops and yeast.

Answer 5

beer generally has 4 basic ingredients; yeast, hops, water, starch/sugar (most common, malted grain).

In the simpliest method, water is boiled with the starch/sugar. The hops is added to add bitterness. Then the wort as its called, is allowed to cool, yeast is added. The yeast ferment the sugars into ethyl alcohol. Then bottled, aged and served.

All other various beers use different yeast, sugar sources, hops, additional ingredients (fruit, honey, spices, etc...)

Answer 6

Can't remember I'm stuck at the tasting stage

Answer 7

Try the link

Answer 8

worried about how its made::not (its where i can let it out)when caught short

Answer 9

Beer making dates back to 5,000 BC when yeast was discovered fermenting in a sugar-water mixture. The yeast consumes the sugar for its own energy and growth, and the primary byproducts are ethyl alcohol and carbon dioxide. Wine is made when yeast consumes the natural sugars in fruit such as grapes, and beer is made when yeast consumes the sugar derived from grain. The naturally occurring starch found in grain must be converted into sugar before yeast can consume it. Thus, beer making is a more complex art than wine making.

Making beer can be broken down into two separate processes -- malting and brewing -- usually performed by two separate businesses. Malting is the processing and preparation of grains for brewing and takes years of training and experience to master. Malting begins by soaking grain, usually barley, in water long enough to begin germination or sprouting. At the same time, enzymes are developing which break down starches to sugars. The grain is then heated in a large oven, called a kiln, which arrests germination and stops the growth of the grain. Other grains, such as wheat, rye, and oats can be malted, and many maltsters sell malted wheat which is commonly used in several specialty styles of beer.

Most homebrewers do not make their own malt because it takes one to two weeks, requires close monitoring and much work, and frequently renders inconsistent results. The two most common methods of malting are the traditional floor malting method, where grain is literally spread across the floor to germinate, and pneumatic malting, most common today, where the environment is strictly controlled inside tanks or drums. Maltsters can malt grains for a wide variety of different types of malt, each offering a different flavor and character.

Beer has four main ingredients -- malt, water, yeast, and hops -- and it can be as simple or technically challenging to brew, as down home cooking is compared to gourmet cuisine. Each ingredient has its own equally important role to play in the production of beer.

To brew beer, the brewer begins by weighing the appropriate amount of grain for his recipe. He then mills his malt in a malt mill which cracks his grain. In commercial operations, the milled malt drops into a grist case which has a valve at the bottom which allows the grain to drop through a chute into the mash tun. Usually homebrewers simply collect their milled grain in a clean container and dump it into their mash tun. The mash tun is a large vessel, usually made of copper or stainless steel, that has a screen-like false bottom for straining your mash later.

Mash is a thin mixture of grains and hot water. Mashing is the process of heating grains mixed with water at controlled temperatures for designated periods of time to activate enzyme activity that converts starches to fermentable sugars. Converting starches to sugars is called saccharification. There are three common mashing methods. Infusion mashing is the simplest because it involves only one temperature throughout the mashing process. Step infusion mashing is basically infusion mashing with one or two temperature increases during mashing. And decoction mashing, most commonly used for lager style beers, is the most complex method because part of the mash is removed and boiled, then reintroduced.

Once mashing is completed, the brewer must separate the sugar-water, called wort, from the spent grain husks. He does this by sparging or rinsing the spent grains with hot water to extract as much sugar from the grains as possible. The grain husks act as a filter bed on the false bottom of the mash tun. Commercial brewers usually do their sparging in a lauter tun. After the wort is collected in the brew kettle, it is boiled for one to two hours.

The boil is a critical step in the brewing process because it is at this step that hops, the aromatic flowers of hop vines, are added. Hops impart aroma, flavor, and bitterness to beer, which balances the sweetness of the wort. To extract the bitter resins from hops they must be boiled, and usually hops are added at various stages of the boil to extract bitterness or impart aroma or flavor.

When the boil is completed, the hot wort is transferred to a heat exchanger or wort chiller which rapidly drops the temperature of the wort to about 80 degrees -- fermentation temperature. As the tepid wort exits the wort chiller, it goes into a fermenter where yeast is added. Most homebrewers us a large glass called a carboy or stainless steel kegs for fermenting, but commercial brewers use huge stainless steel cylindrical conical tanks for fermenting.

The main genus of yeast used by brewers is Saccharomyces, and the species used to make ales is a top fermenting strain called cerevisiae, while the species used to make lagers is a bottom fermenting strain called uvarum. The type of yeast used during fermentation determines whether a beer is an ale or a lager.

The yeast sets to work eating the malt sugar and expelling alcohol and carbon dioxide. This usually takes three to seven days and is referred to as primary fermentation. Homebrewers then rack or transfer the beer off of the yeast bed and into a secondary fermentation vessel, whereas commercial brewers drain the yeast that has collected out of the bottom of the tank.

If lagering, the beer may remain in cold storage for several weeks or for a shorter period and in warmer temperatures if brewing an ale. During the secondary fermentation, the yeast precipitates out of suspension, carbonation develops, and the beer matures.

Finally, the homebrewer is ready to bottle or keg his beer for serving, while the commercial brewer may filter the beer to make it bright and clear before kegging, bottling, or transferring it into a serving tank. Homebrewing is one of the fastest growing hobbies. If you can follow a recipe, you too can brew.

Answer 10

Dunno...
..your round isn't it?