Im refering to the cold water knob, the hot water works fine.
2006-12-18 04:16:31 · 8 answers · asked by Mitch R 1 in Home & Garden ➔ Decorating & Remodeling
Washer has come loose and is blocking the valve. Turn off the water to the house and remove the valve stem. Check for damaged washer and replace.
2006-12-18 04:18:49 · answer #1 · answered by Barkley Hound 7 · 0⤊ 0⤋
There is a diverter in the faucet that causes the water to go to the shower head. It sounds like it has come lose or is stuck. If you can shut the water off to the faucet you can replace it. If you are not handy with repairs than use a plumber or someone who knows how to do minor plumbing
Good luck
2006-12-18 04:28:30 · answer #2 · answered by Anonymous · 0⤊ 0⤋
You may have a blockage between the faucet and the shower head. If you want to "do it yourself" then remove the showerhead, and run a piece of wire through the pipe, and see if you dislodge anything. Replace the shower head, and try the cold water. If you are not handy, or the installation is old, have a plumber check it out. If he breaks it, he will have to replace it.
2006-12-18 04:24:12 · answer #3 · answered by Beau R 7 · 0⤊ 0⤋
Blockage in the shower head or the water miser section.
2006-12-18 04:19:27 · answer #4 · answered by Anonymous · 0⤊ 0⤋
be sure you close off water furnish first. the optimal. then you certainly will choose a socket great adequate to greater healthful the stem with the intention to get rid of then you certainly can replace the washers on the backside of the stems. it might additionally be the stem seat that needs to get replaced.
2016-10-18 10:57:28 · answer #5 · answered by ? 4 · 0⤊ 0⤋
It may be a clogged pipe. a plumber will be able to solve this for sure.
2006-12-18 04:18:16 · answer #6 · answered by CPT Jack 5 · 0⤊ 0⤋
lime build up
2006-12-18 04:17:45 · answer #7 · answered by Jeremiah P 1 · 0⤊ 0⤋
did you pay the water bill?....lol
2006-12-18 04:18:35 · answer #8 · answered by beachnut222000 4 · 0⤊ 0⤋