2006-12-16 22:37:33 · 6 answers · asked by suckmyclit2night 1 in Cars & Transportation ➔ Car Audio
Line out or Line level is the starting point of an audio signal after it's gone through a pre-amplified process. It's a signal that's specifically design to be amplified for better clarity.
2006-12-17 10:46:20 · answer #1 · answered by Anonymous · 0⤊ 0⤋
The "line out" on the back of the stereo are designed as low level ouputs for sending the audio signals to an amplifier. Most stereo's usually have one (identified by the red and white plugs at the back) while some of the more expensive stereo's may come with two or three so you can adjust the amplified system with the fader and balance. The other part to look for is the "sub out" which as you can guess means the subwoofer output. As majority of subs need to be amplified you use this particular line out just dedicated for running a sub!
Hope that was of some help
2006-12-20 11:19:48 · answer #2 · answered by TT 2 · 0⤊ 0⤋
To be more practical, line out is the pair or pairs of RCA outputs behind your stereo, usually red (right output) and white (left output) color. Usually used for hooking up an amp to your sound system. This is where the Audio signals from your stereo go to your external amplifier.
2006-12-17 07:45:00 · answer #3 · answered by mike 1 · 1⤊ 0⤋
Thats where you install your rca cables to run an amplifier
2006-12-18 20:09:45 · answer #4 · answered by Tawanakie H 1 · 0⤊ 0⤋
it's an output from the in-dash unit's pre-amp. you use it to connect an external power amp.
2006-12-17 06:50:47 · answer #5 · answered by bata4689 4 · 1⤊ 0⤋
they line out the suspects so witnessses can identify them
2006-12-17 06:56:06 · answer #6 · answered by paul t 4 · 0⤊ 2⤋