im going to put three tens in a box im bouilding myself. its going to be a sealed box
2006-12-14 09:22:11 · 9 answers · asked by Patrick W 25 1 in Consumer Electronics ➔ Home Theater
Most tens that I have worked with require a 9 inch cut-out. But be prepared to sand it bigger if the cut-out is just a hair too small for your woofer. That has happenned to me.
2006-12-14 11:33:25 · answer #1 · answered by davj61 5 · 1⤊ 0⤋
10 Inch Speaker Box
2016-12-14 12:30:00 · answer #2 · answered by ? 4 · 0⤊ 0⤋
10 Speaker Box
2016-10-07 06:59:13 · answer #3 · answered by ? 4 · 0⤊ 0⤋
The best hole size might depend some on the speaker design. I'd measure the speakers, or use a template if they come with one. For a sealed box you want to make sure there's lots of overhang of the speaker over the lip of the hole so you don't end up with a (noisy) air leak there.
2006-12-14 09:34:49 · answer #4 · answered by Chris V 2 · 1⤊ 0⤋
Measure the speaker from the outside then flip over the speaker, measure the lip of the metal basket, Multiply it by two then subtract that from outside dimension than add an 1/8" and that should be a good tight fit.
2006-12-15 03:33:48 · answer #5 · answered by Aaron 3 · 0⤊ 0⤋
You will need to know the woofers cutout diameter. You will also
want to know how much interior volume you will need for an ideal
frequency response from the woofers.
A good resource for a DIY'er like yourself is...
_
_
_
_
_
2006-12-14 11:57:33 · answer #6 · answered by Anonymous · 1⤊ 0⤋
10 inches for one, but for three, 30. Do the math. It isn't really that hard.
2006-12-14 09:25:08 · answer #7 · answered by digitex30189 3 · 0⤊ 3⤋
TEN INCHES AND A HALF FOR EXTRA SPACE
2006-12-14 09:25:56 · answer #8 · answered by Cj C 1 · 0⤊ 3⤋
approx 3.5cm diameter is enough
2006-12-14 23:16:54 · answer #9 · answered by ulti_ak 1 · 0⤊ 0⤋