Noticed clicking from the starter on occasion andand now happens to not start. I tested the starter and all was well. I have replaced the ignition switch, and have yet to resolve the problem. What else could there be or what else can I do?
2006-12-09 12:28:14 · 4 answers · asked by christopher B 1 in Cars & Transportation ➔ Car Makes ➔ GMC
Usually a clicking noise, over and over is the battery. Did you test the battery before you change the starter? Did you have the starter bench tested before you bought a starter? Next was it rebuilt? By who? Did the starter solenoid come with starter or not. I sold Auto Parts for 36 years I've seen alot of starters right off the shelf that were bad. If you can let me know some of these things, I can be of more help. Sorry I just thought of another thing I needed to ask you. Is it a standard or not if it is, it could be the neutral safety switch. That's the switch that won't allow you car to start, without the clutch pedal being depress.
2006-12-09 12:41:46 · answer #1 · answered by ? 2 · 0⤊ 0⤋
The starter has a solenoid and that's what's clicking likely. Take to starter to autozone or checker and that they'll verify the unit for you at no charge or any automobile factors shop.
2016-10-05 02:44:54 · answer #2 · answered by boland 4 · 0⤊ 0⤋
If your batt test good ,then replace the solenoid.also be sure full 12 volts is present at purple sol wire.
2006-12-09 16:44:16 · answer #3 · answered by deltech 4 · 0⤊ 0⤋
check your ground it may be loose
2006-12-10 01:09:36 · answer #4 · answered by Michael S 1 · 0⤊ 0⤋